Maytag Logo

Maytag Answered Questions & Fixed Issues

Do you work here? Claim your company

  • 2K Products
  • 163K Answers
  • 3M Views

YOU GENTLY SQUEEZE THE PLASTIC TO GET IT OUT OF THE WAY

Maytag... | Answered Yesterday | 30 views


YOU CALL A MAYTAG REPAIR SERVICE TECH .

Maytag Washing... | Answered on Dec 09, 2019 | 28 views


Hi!!
Click on the following link for a diag. of the control panel. to get access to the back of the Control Board http://www.searspartsdirect.com/partsdirect/partsdirect/showSubComp.pd?imageUrl=http://c.searspartsdirect.com/lis_png/PLDM/W0901032-00003.png
check that wiring harness (#8) connections to the Electronic Control Board are tight and the wiring is not broken, burned or damaged. Disconnect the Unit and feel the wire harness (#8) for any small bumps or deformities, repair as needed.

Good Luck! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa!!

Maytag MHWZ600TB... | Answered on Dec 08, 2019 | 306 views


Check the igniter it should glow when turned on

Maytag Dryers | Answered on Dec 06, 2019 | 37 views


FIXYA HAS NO IDEA BUT MAYTAG IS NOT OUT OF BUSINESS CONTACT THEM WWW.MAYTAG.COM

Maytag Washing... | Answered on Dec 05, 2019 | 23 views


Needs further investigation. It seems to be your control board has an issue.

Maytag Washing... | Answered on Dec 05, 2019 | 26 views


The lock mechanism is damaged or defective.

Maytag Washing... | Answered on Dec 01, 2019 | 25 views


We had the same problem with our Maytag Centenial Washer. I simply removed the Auto Fill Sensor, cleaned the contacts with Deoxit contact cleaner and problem solved. All was done in less than 20 minutes.

Maytag... | Answered on Nov 30, 2019 | 4,135 views


SADLY IT NEEDS TESTING DONE SO CALL A LOCAL REPAIR SERVICE

Maytag... | Answered on Nov 30, 2019 | 365 views


will it is the latch assembly switch has gone bad ,you will need to replace it.go to repair clinic type in model and they should have part

Maytag Washing... | Answered on Nov 28, 2019 | 59 views


Request the diagram from Maytag.

Maytag Microwave... | Answered on Nov 27, 2019 | 20 views


check the drum support rollers

Maytag Dryers | Answered on Nov 23, 2019 | 41 views


CHECK THE DOOR LOCK

Maytag Washing... | Answered on Nov 22, 2019 | 45 views


It happened to mine also. Nothing came out of a pocket, either. A scarf worked it's way in somehow and got caught up in the gear that moves the agitator. Lift off the center cap, loosen and remove the 11mm bolt, then lift the agitator straight up... If you don't lift straight up from the middle it will seem like something else is holding it.

Maytag Washing... | Answered on Nov 16, 2019 | 4,376 views


Replace the switch.

Maytag MER6872... | Answered on Nov 14, 2019 | 192 views

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Maytag Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18127 Answers

Cindy Wells

Level 3 Expert

6049 Answers

Are you a Maytag Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...