Maytag Neptune - Popular Questions, Answers, Tips & Manuals - Page 2
I have a top loading
In my opinion it would be better to download a service manual from the manufactures website to quench your frustration for a small price eric
Hole in Maytag Neptune front load washer door and flaking or melting of door.
Hello,
I've owned the same Neptune since 1999 and had this problem happen to me twice, the first time the inside molded plastic door melted through in a circular pattern and had to be replaced. The fact that it was circular indicates that something was rubbing during the high speed spin. That something was a stiff bottomed duffle bag that was rubbing on the plastic door during high speed spin. The washer was full of other clothes that didn't allow the duffle bag enough room in the washer tub, hence it pressed against the plastic door. The second time it happened I got a circular groove melted in, but not through, the plastic door... caused this time by a small child's back pack. I would make sure "rigid" items have enough room to "float" in the tub cavity by not putting in other clothing that over packs the washer.
Washer does not remove water in final spin
If washer hums when it should spin, and the washer will not drain, you may have 2 issues.
First check that the drain pump, drain hose, and wall drain are free of debris.
The washer may not spin properly if the drain system is not operable.
Once you are sure the washer drain pump, drain lines, wall drain, and drain hose is okay, run a test wash.
If the washer hums but now drains, you fixed one issue.
If the washer still hums, you may have a bad belt, motor coupler, motor itself, etc...
Check parts for wear and replace as necessary.I pulled the drain impeller and found a sock from my little guy stuck in there. Fixed!
check all water outlets to make sure there is nothing blocking the pipes.
you could also go to this link it might help you out.....
Washer does not remove water in final spin Google Search
10/24/2017 12:00:09 PM •
Maytag...
•
401 views • 0 helpful votes
Hi, my Maytag Neptune gas
The thermal fuse is NEVER at fault, it is only a symptom of some other problem and is a serious safety warning. Check that the exhaust vent is clean and not kinked or otherwise obstructed. When WAS the last time you cleaned the vent??
9/16/2017 4:12:03 PM •
Maytag...
•
126 views • 0 helpful votes
Drive belt on Maytag Neptune washer not centering
Do you know the story of Kakima and Lil J? Many years ago, a great battle occurred. Kakima struketh with great force and angst, but i passed him, and prevailed. With the greatest achievement on the website, i ran. but kakima chased me, and called the admins! How dare he? What has he doneth to the lil J? He got me banned, and i retrieved balance. I never came back until today. Im finally back to the city of england.
The washing machine quit mid
Always supply a model number, each model has it's own foibles. It is very hard to assist without full details, sorry.
I have the MAH8700AWW model and the smell is awful!
I have read that the imbalance/drum problem is a known problem and should be covered under warranty.
also, that the smell is also a known problem and can only be fixed by replacing the outer gasket. Which seems like a waste of time, as how long would it take for the new gasket to smell?
Maytag neptune dryer belt off and loose
If belt is not broken, then the tensioner is not routed properly. Generally belt comes around drum, then around tensioner pulley then on motor pulley. Tensioner is spring loaded, so you need to pull up on tensioner to get belt around motor. Good luck.
5/5/2017 2:06:02 AM •
Maytag...
•
341 views • 0 helpful votes
Not finding what you are looking for?