Miele Washing Machines - Page 4 - Recent Questions, Troubleshooting & Support

the unit has a brake you cannot spin the drum in that way,with the back off there should be a lever with a cable on it pull the lever back and get someone to try the bowl then

Miele Washing... | Answered on Jan 19, 2019

At 12 years of age, repairs are likely to cost more than the machine is worth.

Miele Washing... | Answered on Jan 15, 2019

My tip: call the service department and ask them what the problem should be. If they refuse to answer, just ask over and over and over again until somebody will finally be connected to you which has to tell you how and what. If a company can repair it, they HAVE to give at least an answer to what is broken.

Miele Washing... | Answered on Jan 15, 2019

Miele washers have a small panel on front toward bottom of machine. Flip this panel open with the key provided inside the soap dispenser drawer. There should be a small orange coloured ring which you pull to release the door.
To cancel program press and hold the start button for about 5 or so seconds. this should give you the option of cancelling the program.
Hope this may help
cheers from down under

Miele Washing... | Answered on Jan 09, 2019

SOLVED: Miele fault F63 - Fixya

www.fixya.com > Forum > Washing Machines > Miele

3 answers
Jan 21, 2012 - F63 on certain washers is an indication of too much soap is being used. If you live in an area where the water is hard and your not using too ... How to solve Technical fault F63 in miele washing
1 answer
Aug. 6, 2017
I have a Meile washing machine showing an F63
9 answers
Mar. 1, 2015
fault F63 display reads fault f63
1 answer
Dec. 8, 2013
Miele w3725 front loader. message on screen
1 answer
Oct. 3, 2010
More results from www.fixya.com

Miele W4840-Faulty Water Path Control Unit - YouTube


Nov 18, 2013 - Our Miele W4840 is about five years old and started having an F63 fault code on thedisplay. We would hear clicking and then the cycle would abort with a drain and then the F63 fault code. I tracked the problem down to the Water Path Control Unit.

Fault Code F63 Water Path Control Unit; Fault Code F65 Drum Light ...

https://www.manualslib.com > ... > SOFTTRONIC W 1113 > Technical information

Miele W1113 Technical Information: Fault Code F63 Water Path Control Unit; Fault Code F65 Drum Light Assembly Fault. Touchtronic clothes washers. Show ...

Miele Washing... | Answered on Dec 31, 2018


this is a tachogenerator fault or the drive motor brushes are faulty. you will need a Miele service tech or a Miele service agent to look at this.

Miele W865 Front... | Answered on Dec 28, 2018

Must be chocked with powder hot water should disolve it.

Miele Washing... | Answered on Dec 28, 2018

It stops because your water level sensor has detected the load point water level.
More than likely the timer mechanism or the motor is fried. You can test these using a good Volt/Ohm meter. Be sure to disconnect the power before doing anything to a washer.
Unless it's a lose connection or bad switch, it's usually more cost effective to replace the washer.

Miele Washing... | Answered on Dec 22, 2018

there is still water in the waterproof tray at the bottom of the machine and the float switch has activated. pull the machine out (if pipes allow) and tip the machine backwards to drain the water from the tray.

Miele Novotronic... | Answered on Dec 15, 2018


Miele Washing... | Answered on Dec 15, 2018

One of the springs has probably come off,take off the top and check all the spring attachments.

Miele Washing... | Answered on Dec 12, 2018

Not finding what you are looking for?
Miele Logo

2,324 questions posted

Ask a Question

Usually answered in minutes!

Top Miele Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 2 Expert

190 Answers


Level 3 Expert

85206 Answers

Are you a Miele Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides