Mitsubishi Computers & Internet - Recent Questions, Troubleshooting & Support
Where can i get his part ? Mitsubishi FDD unit . Type fcu6-fd221-1
It may be difficult to find a replacement FDD (floppy disk drive) unit for a Mitsubishi system, as floppy disk drives are no longer commonly used in modern computer systems.
One option you could try is to search online marketplaces, such as eBay or Amazon, for a used or refurbished FDD unit that is compatible with your system. You may also be able to find a replacement unit through a specialist computer repair shop or electronics store.
Alternatively, you may want to consider upgrading to a more modern form of storage for your systems, such as a USB flash drive or a hard drive. These options may offer more capacity and faster data transfer speeds than a floppy disk drive.
I hope this information is helpful! Let me know if you have any other questions.
Actative usb port
To activate a USB port on a computer, you will need to ensure that the port is physically connected to the computer and that the necessary drivers are installed.
- Check the physical connection. Make sure the USB port is securely plugged into the computer. You may want to try using a different USB cable or a different USB port on the computer to see if this resolves the issue.
- Check the drivers. Make sure the necessary drivers for the USB port are installed on the computer. You may need to install the drivers manually or update the drivers if they are out of date. You can check the manufacturer's website for the latest drivers or use the device manager feature in the operating system to update the drivers.
- Check the power. If you are using a powered USB hub or device, make sure the hub or device is receiving power. Check the power cord and outlet for any issues.
If you have checked all of these things and the USB port is still not working, the issue may be with the port itself or the computer. In this case, you may need to have the port or computer serviced or repaired by a professional.
I hope this information is helpful! Let me know if you have any other questions.
How can i disassemble LG LCD L1740P
To disassemble an LG LCD L1740P monitor, you will need to remove the back cover and any screws or fasteners that hold the monitor's components in place. Here are some general steps you can follow:
- Unplug the monitor and lay it face down on a flat, stable surface.
- Locate the screws or fasteners that hold the back cover in place. These may be located around the edges of the monitor or hidden under labels or stickers.
- Remove the screws or fasteners using a screwdriver or other appropriate tool.
- Carefully lift the back cover off the monitor. Be sure to support the cover as you lift it to avoid damaging the monitor.
- Once the back cover is removed, you will have access to the internal components of the monitor. You can then remove any additional screws or fasteners to disassemble the monitor further if needed.
It is important to exercise caution when disassembling an electronic device like a monitor. Be sure to handle components carefully and avoid touching any electrical connections or components. If you are not comfortable disassembling the monitor yourself, it is recommended to seek the assistance of a qualified technician or repair professional.
I hope this information is helpful! Let me know if you have any other questions.
How can i change 2006 mitsubishi outlander navigation system from japanese language to english language
To change the language of the navigation system on your 2006 Mitsubishi Outlander from Japanese to English, you will need to access the system's language settings and select English as the preferred language. Here's how to do it:
- Press the "Menu" button on the navigation system's control panel.
- Select the "Settings" menu.
- Select the "Language" option.
- Select "English" from the list of available languages.
- Press the "OK" button to save the changes.
The navigation system should now display all menus, prompts, and instructions in English.
I hope this helps! Let me know if you have any other questions.
2008 mitsubishi lancer es cruise control not working after radio install
It is possible that the cruise control system in your 2008 Mitsubishi Lancer ES was damaged or disrupted during the radio installation process. There are a few things you can try to troubleshoot the issue:
- Check the fuse. Make sure the fuse for the cruise control system has not been blown or damaged. You can find the fuse for the cruise control system in the fuse box, which is usually located under the dashboard on the driver's side of the vehicle.
- Check the cruise control switch. Make sure the cruise control switch, which is usually located on the steering wheel or dashboard, is working properly. You can test the switch by turning the ignition on and pressing the switch to see if the cruise control system activates.
- Check the wiring. Make sure the wiring for the cruise control system has not been damaged or disconnected during the radio installation process. You may need to have a mechanic or service professional check the wiring to see if there are any issues.
- Check for software updates. If the cruise control system is connected to the vehicle's onboard computer, there may be software updates available that can fix any issues with the system. You can check for updates on the manufacturer's website or through the vehicle's update feature.
I hope this information is helpful! Let me know if you have any other questions.
Is there a driver for an LS 120 FDD?
The LS-120 (also known as the SuperDisk) is a type of floppy disk drive that was popular in the late 1990s and early 2000s. It is a high-capacity floppy disk drive that is capable of reading and writing to both standard 1.44 MB floppy disks and its own proprietary 120 MB SuperDisks.
If you are looking for a driver for an LS-120 floppy disk drive, it is likely that you will need to use a driver specifically designed for this type of drive. The driver will allow your computer to recognize and communicate with the LS-120 drive, allowing you to read and write to floppy disks using the drive.
To find a driver for an LS-120 floppy disk drive, you may want to check the manufacturer's website or search online for a driver specifically designed for this type of drive. Some common manufacturers of LS-120 drives include Iomega, Mitsubishi, and NEC.
I hope this information is helpful! Let me know if you have any other questions.
What does a yellow triangle on my Mitsubishi Outlander Sport mean
A yellow triangle with an exclamation point inside of it on a Mitsubishi Outlander Sport usually indicates a warning or caution message. This warning message may be related to a specific system or component in your vehicle, such as the brakes, transmission, or tire pressure.
To find out more about the specific meaning of the yellow triangle warning, you will need to consult your vehicle's owner's manual or refer to the warning message displayed on the dashboard display. The owner's manual should provide more information about the meaning of the warning and any necessary action you should take.
If the warning is related to a specific system or component, it may be necessary to have the issue addressed by a mechanic or service professional. Ignoring a warning message could potentially lead to further problems or damage to your vehicle.
I hope this information is helpful! Let me know if you have any other questions.
Need to repair/replace MF355F-3252MG floppy disk drive to Technics SX-PR702M electronic keyboard. Do you have a source?
It may be difficult to find a replacement floppy disk drive for your Technics SX-PR702M electronic keyboard, as floppy disk drives are no longer commonly used in modern computer systems.
One option you could try is to search online marketplaces, such as eBay or Amazon, for a used or refurbished floppy disk drive that is compatible with your keyboard. You may also be able to find a replacement drive through a specialist computer repair shop or electronics store.
Alternatively, you may want to consider upgrading to a more modern form of storage for your keyboards, such as a USB flash drive or a hard drive. These options may offer more capacity and faster data transfer speeds than a floppy disk drive.
I hope this information is helpful! Let me know if you have any other questions.
How to fix "black" screen on my DiamondPoint V50Lcd?
It sounds like you are experiencing an issue with your DiamondPoint V50Lcd monitor where the screen is displaying as black. Here are a few things you can try to troubleshoot the problem:
- Check the power. Make sure the monitor is turned on and receiving power. Check the power cord and outlet for any issues.
- Check the cables. Make sure the cables connecting the monitor to the computer are securely plugged in and in good condition.
- Check the computer. Make sure the computer is turned on and functioning properly. Try connecting the monitor to a different computer to see if the issue is with the monitor or the computer.
- Check the monitor's settings. Make sure the monitor is set to the correct input source and that the display settings are properly configured.
- Restart the monitor and computer. Try restarting both the monitor and the computer to see if this resolves the issue.
- Check for updates. Make sure you have the latest driver and firmware updates for the monitor. You can check for updates on the manufacturer's website or through the monitor's update feature.
If you have tried these things and the screen is still displaying as black, the issue may be with the monitor itself. In this case, you may need to have the monitor serviced or repaired by a professional.
I hope this helps! Let me know if you have any other questions.
How to turn off the japanese voice on a 2008 Outlander
To turn off the Japanese voice on a 2008 Mitsubishi Outlander, you will need to disable the voice guidance feature in the navigation system. Here's how to do it:
- Press the "Menu" button on the navigation system's control panel.
- Select the "Settings" menu.
- Select the "Voice" option.
- Select the "Voice Guidance" option.
- Toggle the "Voice Guidance" setting to "Off."
- Press the "OK" button to save the changes.
I hope this helps! Let me know if you have any other questions.
I have an issue of my car mitsubishi spacegear,,4m40 year 1994..why does A/T blinking at the dashboard??
It sounds like you are experiencing an issue with the automatic transmission (A/T) indicator light on your dashboard. The A/T indicator light is designed to alert you to problems with the transmission system. If the light is blinking, it may indicate that there is a problem with the transmission and it should be checked as soon as possible.
There could be a number of reasons why the A/T indicator light is blinking on your Mitsubishi Spacegear. Some common causes include:
- Low transmission fluid level: If the transmission fluid level is low, it can cause the transmission to malfunction and the A/T indicator light to blink. Check the transmission fluid level and add more if necessary.
- Faulty transmission control module: The transmission control module is responsible for controlling the transmission. If it is not functioning properly, it can cause the A/T indicator light to blink.
- Wiring issues: If there are problems with the wiring in the transmission system, it can cause the A/T indicator light to blink.
I recommend having a mechanic diagnose the problem in order to determine the cause and recommend the appropriate repair. I hope this helps! Let me know if you have any other questions.
MF355H - 262MG
I sell a replacement drive for this one used in Yamaha Disklavier Pianos on E-bay. I am getting ready to list 9 of them, The address to my E-bay store is
https://www.ebay.com/str/dunnbrothersplayerpianomusic
Question about Mitsubishi D80
Mitsubishi D80not told how connectedNO PC toldno OS Told (windows or mac or what) XP to W8 is yes.no connections told.when did it last run googe, last week, last year or last decadereal model; this????CP-D80DW>> color printer?USB cable.? get the makers software , lost the CD of software ?windows XP and w7/8 is stated in your manualusing that?got front panel ALARM LED errors, page 20?read page 23, what to do before calling for help? do that?do the cleaning steps
https://www.manualslib.com/manual/774805/Mitsubishi-Electric-Cp-D80dw.html?page=24&term=clean&selected=1#manualand up to w10 online support from maker. + OXS now.drivers seen here,the manual tells how to load that and connect USB last , never first, RTM read how to do that, and then test the printer with new ink.CP-D80DWhttps://mitsubishielectric-printing.com/en/downloads/drivers-tools
How can i watch video through my sd card on mitsubishi nr-mz50 car dvd??
Mitsubishi Electric NR-MZ50 Car Navigation System $1800 !
WHAT CAR? and YEAR<, go to MFG. web sit and get the manual first, if LOST ! IT.
What makes you think it can?>
sure hope.
WHA
open glove box and RTM? yet, unstated car.
car radio, head- in's/nAV are very dumbb(sic) as class of devices.
they only allow a limited set of formats.
you'r talking about movie file formats 100s,
The movie file, formats to try are MP4 and MKV (most common)
The manual Mz50. first. it will tell you what it supports, and no 2 car-heads work the same or have same limits,
so that means RTM read the manual then do experiments.
also some HEADs may have DRM rule limits.
that car HEAD really is not a computer, so is off topic here.
the MZ50 tuner can record to the SD card.
why not just try it.
find a small mp4 movie, and put it on the card, just 1 file
and see if you can play it,
but there are 100s of formats.
talk to Mitsubishi dealer or
try these
https://fileinfo.com/filetypes/video
It many do 1 or 2 but NEVER ALL formats.
Not finding what you are looking for?