Mitsubishi Televison & Video - Page 9 - Recent Questions, Troubleshooting & Support

It's been a lot of years since I worked on an HS-U65, but I'm pretty sure it only plays NTSC VHS Tapes.

check out steps-by-step guide to fix error code 3-4 at: https://mslivesupportchat.blogspot.com/2019/01/error-code-3-4.html

my 55613 tv wont turn on just blinking green light

http://serviceman.site88.net/index_files/MitsubishiTV.htm

do you get a click if not check the fuse inside next to the ac cord inside the unit
if you do have a click then your convergance amps let go you will need a tech to replace them qbout 150 dollar job

Bulb has failed, replace and clean all cooling fans of dust.

Try here: https://www.directutor.com/remotes/Mitsubishi_290P122020_Remote_Manual_Codes?page=160

Probably the code is 000.

Did you let the green light flash for about 70 seconds? It goes thru a self check when plugged in and takes a little time

I am having this same problem from the same model # television.

you need special pair of glass's that came with the TV to watch it in 3d

It is probably wired wrong, so the wires connecting the light to the house may need to be fixed.

Did you check the caps on the power board when you had it out?

Did you try this yet

SYSTEM RESET
If the TV will not respond to either the remote control
or the front panel controls and/or will not power Off,
press the SYSTEM RESET button with a pointed item
like the end point of a paperclip. The TV will turn Off
and the TIMER light will flash quickly for about one
minute. When the TIMER light stops flashing, you may
turn on the TV again. Changes you made the last time
the TV was On before you used the SYSTEM RESET
button may be lost, however, the changes you made
previously are not lost.
POWER/TIMER Indicator
The green light is a multi-function indicator. This light
will flash rapidly for about one minute each time the TV
is plugged into the wall electrical outlet, when power
is restored after a power failure, or using the SYSTEM
RESET button. Do not attempt to turn on the TV again
during this period. Wait for the flashing to stop and
the light to turn off, before attempting to turn the TV
on. While the TV is powered on, the light illuminates
steadily. If the TV has been programmed to turn on
automatically using the Timer feature,