Nintendo Video Game Consoles & Games - Page 5 - Recent Questions, Troubleshooting & Support

Wii Error Code 51330 and 51331, and 51332 means incorrect WiFI password and the wrong password was typed in.

Your Wii remote is broken or the that one button is broken and you should buy a new WII remote.

The capacitors have gone bad inside of your N64 console and need to be replaced and or that the ac adapter has gone bad then. I would try buying a new ac adapter to see if that helps and also replace the capacitors inside of your N64 console as well and the red light flickering should stop then.

The plastic part inside of your WII's disc drive that holds the disc's in place is going bad and needs to be replaced.It could also mean that the disc drive is starting to go bad and is wearing out and will need to replaced for your WII console.

The problems here would be related to parts on the Nintendo 64's motherboard, maybe also the capacitors too inside of the console it's self . Its also very possible that the heat sink has gone bad and the power supply is going bad inside of the console the ********* piece where the ac adapter attaches too they would be complicated repairs to do you would be better off purchasing a new Nintendo 64 console than to repair the current one that you have If you live somewhere where there are not a whole lot of choices are available then you should just purchase a new one

Here are step by step instructions on connecting your Nintendo Wii to the internet. Please note you must have a wireless internet connection available to you, the Nintendo Wii only connects to the internet via wireless signal.http://www.nintendo.com/consumer/systems/wii/en_na/getOnline/index.jsp

Hi. Welcome to fixya!

Hereis a step by step procedure on how to connect your Wii to the internet.

1. Turn on your Wii console and press the A Button on the Wii Remoteto reach the Wii main menu. Use the Wii Remote to select the "Wii"button.

2. Select "Wii Settings" to access the"Wii System Settings" menu.

3. Using the arrow on the right side of thescreen, scroll to page two and select "Internet."

4. Select "Connection 1: None"

5. Click on "Wireless Connection"and then "Search for an Access Point."

6. Select "OK" and the Wii willdisplay all the wireless networks it finds.

7. Select the wireless network that isyours.

8. If prompt to enter the security code,enter the security code that you have saved your router settings.

I am guessing that maybe there is something internally wrong with your gamecube console the hardware inside of your gamecube console is having issues then or the fan might not be working anymore so it keeps on showing up an error has occurred and it needs a new fan. If the disc look fine and work on a Wii console then there is something wrong internally with your gamecube console and it needs to be repaired. It would be cheaper to buy another one from Lukie Games or DKOldies or East Starland Games or JJ games or you can buy a Wii and play on a Wii console.

• I think that you need a CRT TV in order for your Nintendo 64 console to work the old console don't work with the newer TV's.

hi im 9 and i can help you save your settings by turning off the ds and then try to save everything you need and then dont shut close the screen there you go. and fold it back up and it saves

http://www.youtube.com/watch?v=cOWPEwfWkY0&feature=related

It could be due to having a bad video chip inside of the console so it goes into slow motion or the jumper pack or the expansion pack is starting to go bad. Or the console needs to be cleaned out too. The coloured Nintendo 64 consoles seem to be made lower quality than the original black N 64 consoles are. Try a new expansion pack and a new jumper pack then to see if it makes a difference. You needs a 4.5 mm bit game tool to open up an N 64 console. DK Oldies and East Starland games and Lukie games and JJ games sells those and jumper and expansion packs for N 64 consoles.

The RCA jacks for video 2 on your TV are not working and need to be fixed or replaced then.

should take at least 3 or four times but i think you may have to delete your dog and restart

lol u have to give it a small name if this dose not work tell me at [email protected]

The disc could either be scratched or dirty then.

'Kay...
I just got that problem too.
"Edge.dat tidak menemukan" means that "Edge.dat cannot be found".
There's a way to fix it.
1) Check your Microsd Card
2) Redownload the EDGE or iEDGE
EDGE: http://www.linfoxdomain.com/nintendo/ds/dl.php/EDGE_OS_v2.0.rar
iEDGE:
http://www.linfoxdomain.com/nintendo/ds/dls/iEDGE_OS_v2.0.rar
3) Then, you will see an books icon, right click and choose "Extract Here".

4) When done... you'll have:

5) Then You copy it to the Micro Card. Edge.dat must not be inside a folder on the card.
6) Then finish.
( I hope it help. Sorry if my tutorial isn't clear -_-. Cuz my English are pretty bad T_T)

I am having the same problem with my super Nintendo console not having the red power light coming on. It could be the ac adapter that is causing your SNES console to not be turning on. You could try a new SNES ac adapter to see if it works or not. If your SNES console still is not coming on with a new ac adapter it maybe be the fact that your console is not working anymore and it would be more cheaper and easier to buy another SNES console than to fix the current one that you have. Lukie Games and DKOldies and East Starland games and JJ games have SNES consoles.

My N 64 console goes in slow motion as well too. It could be the ac adapter might be causing this problem here so try a new ac adapter to see if it solves the problem or it could be the power outlet as well that is not putting out the proper power to the console or it needs to be cleaned out. Or the video chip went bad and the slow motion is occurring. The jumper pack or the expansion pack could be starting to go bad and needs to be replaced and it is warning you that the jumper or the expansion pack is going bad and will stop working anytime and the game will freeze and then turn all black and then blank out on you and you will go to the screen on the TV after that. Sometimes the expansion and the jumper packs can quit working with no warnings at all to let you know. Or it can say on the TV screen expansion pack or jumper pack is needed. I have tried a new expansion pack for my N 64 console and it is working fine again it could just be that.

It appears that your Wii console's Internet connection might be affected by wireless interference.