NordicTrack Exercise & Fitness - Recent Questions, Troubleshooting & Support


most commonly at the end of the walking flat form. on both side end there are hex heads bolts that is what we use to adjust the belt on proper tension or tightness . and it could be use for keeping the walking belt in the middle of the flat form.

NordicTrack... | Answered on Oct 22, 2019


the motor drive assembly is seperate from all the electronics that you program and the incline motor ,although it may not work if there is a "Saftey 'Clip that attaches to the machine and clips on yourself
it wont work without this "or if this Magnetic Clip is 'Faulty,
If you can lay Machine down on its side or look for a plastic cover at the front or underneith and see if you can Unscrew and access the
motor ..there may be a Overload Reset Button or Fuse just after where the Main Power Cord goes into the Tredmill.
tred mills also are common for getting pet fur and hair in the motor which can get caught up in the Brushes, (I Think it is Most likely a Fuse or overload switch that is inline with the main Drive Motor.(if you can post exact Model# of TREDMILL I can have a look at the Electrical Diagram and make a more accurate conclusion ,Cheers!

NordicTrack... | Answered on Aug 18, 2019

Not finding what you are looking for?
NordicTrack Logo

257 questions posted

Ask a Question

Usually answered in minutes!

Top NordicTrack Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

135 Answers

Kardoc

Level 3 Expert

5488 Answers

Steve P
Steve P

Level 3 Expert

3712 Answers

Are you a NordicTrack Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...