Olympus Stylus - Recent Questions, Troubleshooting & Support - Page 4

Lens is out of correct possition.

I have had success with this camera recovery software... Download the photo recovery program called asoftech photo recoveryhttp://www.asoftech.com/apr/You have to use a card reader either on your computer or an external USB card reader. Put the card in the card reader, open the recovery program, then select the drive where files are deleted, then press "Start" and wait for it to do it's magic.

press a delete button clock/"trash can" icon at the lower left corner on the back.

For this I would like to know if any water got into the camera.
If it did, then it more than likely has been shorted out, since you said you turned it on.
Good for parts if that is the case.
Any kind water in any camera spells doom.

If you ever have a digital camera which has any water exposure, then immediately remove the battery and if possible open the camera case by removing at least the back's screws, making a note where each goes. Let the camera dry out for a few days minimum.
Even after this, most digital cameras will not survive the water damage. The circuits are so small and delicate that any water will cause damage. Corrosion will do the most damage as a result of water causing chemical reactions with the solder and other elements. Any small damage to these tiny, delicate circuits will spell doom.

Most brands of cameras deliver a CD with the camera, containing software, needed to backup, transfer and work with the pictures you shot, to a computer. Most of the time there is software is for both, Windows and MAC. Before you connect the camera to any computer, you should install the software. The disk also has the drivers for the old operating systems. If you lost the CD, or just don't know where it is right now, you can go to the site of your camera brand and try to download the software you need. For that look under support. If your camera is old, and the brand does not exist anymore, try a freeware picture transfer / editing software pack. Like Gimp or Adobe Photoshop elements. Just connecting a camera to a computer causes two things. The camera shuts down, and the computer won't recognise the camera. So nothing works. If you can't get software form your brand, you always can install other generic software like Ulead, Pixir, BeFunkey, Gimp, Photoshop express. Or if that is not possible you could install an external memory card reader and download the pictures via de memory card reader.

there is a lot of recover software on the internet, here is one you can use, and the free version is ok : https://www.piriform.com/recuva/download othervise try to look here on google search : https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF-8#q=undelete hope it helps or return here...

Check the white balance setting on your camera. Different colors of light such as from the sun or florescent bulbs turn out differently in a camera if it is not adjusted to the color of light you are shooting in. Most cameras do this automatically in auto mode, but if it gets it wrong, you can manually set it until the color looks right. The Options are usually Auto, Clear Sky, Cloudy Sky, Tungsten light, ect..