Panasonic Palmcorder - Popular Questions, Answers, Tips & Manuals

Push the - what ? We are all agog to know what you have to push, provided the answer is suitable for family viewing.

call panasonic if there are that many posts maybe it is a recall issue and they should know about it.

Since we do not know where you are, we can offer no advice as to where you could go for repairs. Sorry.

Is there one ? Which version of Windows ?

I think the technical term is 'broken'. Take it to a service centre.

you cannot move the spindles/cogs in a mini dv tape without pressing down a small lever on the rear of the cassette. the lever is in the lower right, move the lever, then move the ribbon protector to the open position, then spin the cogs, the tape should be free. if not, then you have a jamm inside the cassette, you can open these casettes by removing 4 small screws. ( this is a very fiddly job & you may ruin the casette, if you dont know how )

that error is to do with the lazer lens that reads the disc, you can try a cleaning disc or using a can of comressed air. it could also be a worn spindle, but that normally makes the mechanism noisy.

The answer to this is probably in the manual - have you looked there ? If not, careful perusal of all the options in the menu system should point you in the right direction.

Take the tape out to keep it safe, then remove the battery for 24 hours.

have no clue what you are rying to say, more details of what you are doing AND THE EQUIPTMENT YOUR DOING IT ON

Shut it off, remove battery, install battery , turn it on and try it again, usually it works.

it's available at the Panasonic website.

hi, is it close without a cassette ? if so the reel sensor in the cassette compartment may be faulty. if the head drum not rotates the cassette drive will not work correctly, if so please loosen the head drum with a plastic rod or some tools like that. do not put your finger in hence sometimes will jam your finger. remember don"t touch the scanning chip of the head.

hi, it seems to be the magnetic head of your camera is either dirty or damaged, if it is dirty please use a head cleaner cassette to clean it, if it is clogged with dirt, clean it manually with some cleaning liquid, use a cotton swab to do this. be careful to avoid damaging the scanning chip on the head drum, don"t put pressure on it.

Hi, Windows 13? The newest version of Windows in 8.1 32/64. Windows 10 will release in August this year. So say they. Windows 13 probably will appear in 20... Isn't it ? * I don't undestand what you need ! What kind of video. Need U prog too run movies,videos,etc.? Or U have drivers to connect your device to pc? If u need prog for playing videos, I will suggest you GOM Player (Be carefully WHEN YOU INSTALL IT !,because are 2 mone prog in under check box ! Have a nive day

http://camera.manualsonline.com/manuals/mfg/panasonic/panasonic_camcorder_product_list.html

On this kind of cameras its impossible. U need a tracking adjusting button which is only on pro cameras. I doubt if its worth to give it in for repairs

Probably tape stuck, unless u know what u are doing take it to a repair shop. Fixing it takes a minute

http://www.ebay.com/sch/i.html?_nkw=panasonic+palmcorder+cable

I dont think u can do that on playback only on recording, it works auto.