Panasonic Tablets & eReaders - Recent Questions, Troubleshooting & Support

Pass is on BIOS :(
one year I don't used that LP :(
I try everthing :( but nothing

Hi, try attempting a factory reset on the access point device and then try the connection again. Thank you.

MANY Models! WHICH is yours?

Hi. Ok you're tablet has 8 GB of memory & 1 GB of RAM ::: u can delete data u don't use this will free up some memory :try to transfer you're movies & data to you're SD card :::::buy a 32 GB SD card if u need it .cheers

The command.com is a key file in the booting up process of computers. You either have a virus that destroyed it, or your hard disk drive is failing. Try going into the CMOS and make sure the CD is listed in the boot order and first, then boot to system CD.

keyboatd controls are found by going to control panel--keyboard --and clickong or the tabs

Try to charge the battery with the Panasoniv programm: Calibration Utility. I think is a battery problem.

Is there any chance the video output is switched to feed the rear VGA connector? ie the screen is black due the video being routed away from the screen. Try hitting F5 key.
Can you hit the Delete key to try and enter the bIOS screen? (it may be another key such as F1 or F2. See your Toughbook manual)
Can you have someone make you a bootable USB thumb drive and try booting up with that?
Its also possible that the hard drive has failed, but usually the BIOS POST check will initiate and indicate a failed hard drive or bad RAM etc
Can you remove the 2.5 inch hard drive? Usually its accessible under a removable panel under the laptop.
Feel free to ask more questions.
Cheers,
Steve
PS have you tried the discussion forums on the Panasonic website?

ANY model