Panasonic Televison & Video - Page 11 - Recent Questions, Troubleshooting & Support
Panasonic DP-UB820EGK free region
All you need to do is load up the disc. When the message pops up that says the disc will only play in a Region B or C player pops up, press "stop" on the remote control. Then press "1" on the remote, followed by "enter." This will bypass the message and load up the disc to play normally.Alternatinely, insert the disc, wait for the region warning, press OK and then 270811.
11/2/2021 4:27:36 PM •
Panasonic...
•
Answered
on Nov 02, 2021
How do I copy a programme I have recorded on the
On your machine or on the r/control you should have a copy button,if you press this you should get a menu come up on screen.It should ask you which way you want to copy,so you will go HDD-DVD-R,then press copy again and it should do it automatic,hope this helps.
10/29/2021 2:50:10 AM •
Panasonic...
•
Answered
on Oct 29, 2021
How do i copy a
HOW TO MAKE A COPY VHS TO D
GO VIDEO DVD Recorder + VCR VR3930VD
10/29/2021 1:39:23 AM •
Panasonic...
•
Answered
on Oct 29, 2021
Disc Protection
how do I remove the 'disc protection on' from my DMR-E55 panasonic recorder?
10/12/2021 2:03:08 AM •
Panasonic...
•
Answered
on Oct 12, 2021
What board should I change
Three blinks of the power LED indicates an over-current or over-voltage condition in one of the DC supplies of the AP board. The AP board is repairable. Therefore the use of an ohmmeter and peak-hold-voltmeter is required to determine the cause of the shutdown. An over-voltage condition is definitely a defect of the AP board. An over-current condition may be due to a short circuit located in the AP board, A board, or the LCD panel.
Panasonic pv-c1350w channel/clock auto set
You are probably talking about the main menu that appears when the TV is taken off the AC power outlet, to get rid of this page just turn the tv off and on again and it should give you access to what ever channel was tuned before, if your game console has an RF out, your TV should be set to channel 3 ir 4, if the console has composite outs the change the channel until the TV goes to Aux in or Video in. Retrevo.com has an instruction manual available which you can download free, just in case you need more informantion, if the channel keys do not work, then you may have to get a universal remote ,they are fairly inexpensive and will come in very handy at least for the basic functions or just have theTV worked on.
10/3/2021 6:40:02 PM •
Panasonic...
•
Answered
on Oct 03, 2021
Panasonic TX-L42E5B blinks 3 times which board is faulty
When an abnormality has occurred to the unit, the protection circuits operate and set the unit to stand by mode. At this
time the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
Fault maybe on the A board 3.3V SOS give me your email & i send you the full timing chart.
Subtitles always on
We believe you have the Closed Caption decoder in your TV enabled. Please turn off the CC feature in the TV.
9/29/2021 2:49:52 AM •
Panasonic...
•
Answered
on Sep 29, 2021
Not finding what you are looking for?