Panasonic TH - Popular Questions, Answers, Tips & Manuals
Remote control codes
I'd check your Panasonic user's manual, usually, there is a list of codes for "other" devices. There may also be a way to do an automatic upload of the Toshiba device's code if it is on and the right button on the Panasonic remote is pushed.
2/10/2018 3:39:03 PM •
Panasonic...
•
240 views • 0 helpful votes
Programming channels for TV viewing?
You can often find the digital channel numbers for your local stations in a guide like
http://www.titantv.com/ or
https://tvschedule.zap2it.com/?aid=gapzap . Alternately, check if the local stations websites offer a link to their schedule. This will usually list the channel/channel digital identity. Another source for the digital channel numbers are the antenna choice/position/direction guides. Look at
http://www.antennaweb.org or
http://www.tvfool.com . Tvfool.com gives the direction and signal strength for all channel transmitters in your general area. Antennaweb.org is much more conservative and will only give the strongest stations in your area. That conservative list assumes an external antenna and clear path between the transmitter and your antenna.
In my area, the analog channel 7 became digital channel 7-1 . However, the channels 12 and 16 now transmit at 43-1 and 46-1 . However, after letting the TV do the auto-search, they are 12-1 and 16-1 when I type in the channel numbers on my remote.
I hope this helps. I might be able to provide a list of your local digital channels if you add a comment with your general location.
Cindy Wells
3/4/2018 6:09:03 AM •
Panasonic...
•
114 views • 0 helpful votes
Permanent horizontal black lines on my 50
Ive got bad news for you, about 90% of the time black horizontal lines are caused by the panel failing, your going to need a new TV. You can try replacing the timing board but the chances of it fixing it are slim..
1/6/2018 7:36:03 PM •
Panasonic...
•
173 views • 0 helpful votes
Only in the last 2
A guess would be you have some LED's in the panel that are going bad and its drawing to much current
2/3/2018 5:48:03 PM •
Panasonic...
•
41 views • 0 helpful votes
Panasonic TH-42PX60U Turns On/Off by itself
Fault at its main digital board.
Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
9/30/2017 1:42:03 PM •
Panasonic...
•
248 views • 0 helpful votes
Panasonic th-42ph9uk Shuts down often red led
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, [Exclude the model number] in the "Search box at the top right of the display window of the Homepage" to get gathered related posts
7/10/2017 12:12:03 PM •
Panasonic...
•
258 views • 0 helpful votes
I purchased the tv in
If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Line faults & possible causes to LCD & Plasma screen are given with illustrations
. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
8/16/2017 11:18:03 AM •
Panasonic...
•
67 views • 0 helpful votes
Blinking red light on TV
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, [Exclude the model number] in the "Search box at the top right of the display window of the Homepage" to get gathered related posts..
7/9/2017 11:45:03 AM •
Panasonic...
•
103 views • 0 helpful votes
Not finding what you are looking for?