Paradigm Exercise & Fitness - Recent Questions, Troubleshooting & Support

Reset the machine and proceed wit this steps. God bles you

    • 1
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.

Paradigm... | Answered on Oct 03, 2013

see the diagram attached, and proceed according.
The black is NOT ground is Hot or L. The green is ground. The white is N God bless you

Paradigm Fitness... | Answered on Sep 29, 2013

iFit Help: Updating Firmware On Your Machine
  1. Go to the app settings.
  2. Check for firmware updates.
  3. Select the update, if available.
  4. While your machine is updating, keep the app open and near your machine until the update finishes. Do not disconnect or disable Bluetooth® during the update.
  5. Depending on your WiFi™ connection, the update may take 15-20 minutes. > learn > ifit-help-updating-firmware

iFit Help: Updating Firmware On Your Machine ' NordicTrack ...

Exercise &... | Answered 7 hours ago

Well now you know why they were selling it! You were scammed. > Categories

Stairmaster Equipment Repair Help Videos ' Steppers, Stepmills

We've got troubleshooting videos to help diagnose and repair your Stairmaster equipment like the Steppers and Stepmills. Check out our online technical ... > Select > Momentum-Upright-3400-CE

StairMaster - 3400 CE - Fitness Repair Parts

Brand: StairMaster. Category: Stationary Bicycles - Commercial Upright Bikes Model Name: Momentum Upright Model Number: 3400 CE Upright ...

Exercise &... | Answered 8 hours ago

I don`t like Velo sport. I like just football games. I am shocked by such information. So I know that many couples love sports. They constantly bet on football teams, and if one of them wins, the money goes to the family anyway. This is unique! Here you have a joint wish list! Just follow here and seize the moment!

Exercise &... | Answered Yesterday

Gym?? I prefer football right now. It is necessary to play sports so that there are no such problems! I am always for sports! Physical activity is simply necessary, cardio as football is also suitable. I play football almost every day, and in the evenings I bet on this site to always be on top. This adds excitement to my healthy life. Just do something in the morning!

Exercise &... | Answered on Jan 25, 2020

You can do this through the app on your phone or computer.

Exercise &... | Answered on Jan 24, 2020

Inspect the underside of the belt and the top of the deck, most likely wear from a lack of lubricant in the past.

If the item is new, pursue a warranty. If the item is used pursue a deck/belt, but it may be more then it is worth.

Exercise &... | Answered on Jan 23, 2020

Chase power to make sure it is getting to the lower control board and beyond, but most likely the lower control board if everything else checks out

Exercise &... | Answered on Jan 22, 2020

If it starts and then stops.

Check the speed sensor. If a treadmill takes off like normal and doesn’t relay any speed info, it will shut down due to the motor speed not matching the speed sensor speed.

The impact could have dislodged the magnet from the front roller. It may be stuck to another metal piece in the area

Exercise &... | Answered on Jan 22, 2020


Exercise &... | Answered on Jan 21, 2020

Most treadmills will produce some sort of error code if everything is ok in the the lower control board, but you get no response from the motor when pushing the start button.

First verify the motor is functional. I use a 12v 9ah battery commonly used in a Vexlar fishing system, but I have even used the connection points on my cordless drill battery to make a run. Using one of these small power source will make the motor/belt move, but you will be able to easily make the belt stop if you were to step on the walking belt. The point of the exercise is to verify the motor is operational.

If the motor is operational and the unit still does not throw a code or recognize there is an issue, then you can feel about 90 percent confident it is the lower control board under the hood that supplies power to the motor.

The “click” is often some capacitor opening and attempting to send power, but another path way on the board is holding the system back.

Lower control boards go out commonly. They can just have a defect or they are the result of too much stress.

Exercise &... | Answered on Jan 21, 2020

Not finding what you are looking for?
Paradigm Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Paradigm Exercise & Fitness Experts

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Tom Chichester

Level 3 Expert

55370 Answers

ray gallant

Level 3 Expert

66248 Answers

Are you a Paradigm Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides