Philips Televison & Video - Page 4 - Recent Questions, Troubleshooting & Support
Tv Philips 70pus7505/12 stuck on tv installation
Press the "Volume Up" and "Volume Down" buttons at the same time to make the menu appear.
check the user manual
https://www.download.p4c.philips.com/files/7/70pus7505_12/70pus7505_12_dfu_eng.pdf
2/26/2022 2:26:01 PM •
Philips...
•
Answered
on Feb 26, 2022
Won`t play disney movies
Apparently this is a known issue. Some dvp642 players have compatibility issues with some of the Disney DVD's. A firmware update might help.
There is a discussion of this at:
http://www.videohelp.com/forum/archive/t317193.html
I need to copya vhs
Can you provide the model of DVD/VCR player? Not all models do this.
For the ones that can, you need to use the Dub feature. Put a blank DVD (or one with sufficient space) in the DVD tray; initialize the disc if you are using a rewritable disc (RW). Then put the VHS tape into the VCR (you may want to break off the write protection tab). Then set the unit to VCR mode and forwared the tape to the desired recording point (copy-protected tapes can't be copied). Then some models have a dub or copy button on the unit and/or on the remote (press it and follow the onscreen prompts to select VCR to DVD, recording quality and press Enter to start). The copying will stop when you press Stop or run out of space on the DVD. On some models, you need to do this with the on-screen menus. For those, the look for a Dub feature (where it is will vary in the menus - usually in the same submenu as timed recording) and then select VCR to DVD and the rest.
I hope this helps.
Cindy Wells
(I'll be glad to provide more information if you provide a specific model. I've worked with several brands and there are some differences in the setup routine. My current unit is a Zenith with a Copy button on both the front panel and the remote.)
3005 works, and after a minute then stand works then stands, and so on
I have a DVP3005 too, and this works for a while. Then suddenly jumps back 1 chapter. Then plays for ? little while, and jumps back one chapter again.
I thought it might be a temperature problem(the prcessor was very hot), so I took the lid off and cooled it down, but the error came back.
I have dismantled the front PCB, and it is not a problem with the switches, and it is not the remotecontrol that causes this error. Is it worth troubleshooting?
[email protected] Norway
Is the philips dvd player
DVD players cannot play Blu-Ray discs. Most Blu-Ray players have DVD support, which means they can play DVDs as well as Blu-Ray. Unfortunately, the DVP3982 is not a DVD player, not a Blu-ray player, therefore it cannot support this format.
The player says wrong region code
Where did u bought this DVD player?US,Canada,and Mexico?The DVD disc. used NTSC region format.Asia,Europe,Africa,and the Middle East.The DVD disc. used PAL region format.They can't be mix or it will not play as u find out.If u move in and out to another region of the world.U must have a regions free DVD player to play either NTSC or PAL regions.
Some dvds do not run properly in my dvd player
check the region code of the dvd that u bought...if its not according to your country region code then the dvd would play only in laptops and pc dvd drives..u can contact the service station of philips and ask them to unlock ur dvd player so dat it becomes region free..i had the same issue with my dvd player
55pfl5601 Philips Television
It could be or it could be the main as well. Do you still have sound or does it go to just standby light?
11/20/2021 1:12:43 AM •
Philips...
•
Answered
on Nov 20, 2021
Not finding what you are looking for?