Polaris Pool & Spa - Recent Questions, Troubleshooting & Support


after unscrewing bolts around pump housing unscrew screw on impeller backwards thread then twist off impeller regular thread holding back of motor shaft remove impeller then remove 4 screws holding motor to housing you will need a new seal and o ring for shaft if motor overheated probably distorted housing and may leak less hassle replace whole pump

Polaris Pool &... | Answered on Sep 15, 2019


Check for clogs at sweep inlet and check suction presser at skimmer or wall inlet. Make sure all your baskets are cleaned out.

Mike.

Polaris Pool &... | Answered on Aug 25, 2019


Check floats on hose see if spacing ok or filled with water

Polaris Pool &... | Answered on Jun 15, 2019


Has this pump worked at all -pumped water?
When it's running for about a minute, is it pumping water?
Is this a self priming pump or do you need to prime it?

Polaris Pb4 - 60... | Answered on May 21, 2019


make sure thruster is at 11:00

Polaris Pool &... | Answered on Feb 22, 2019


Thank you for posting your question here on Fixya.com.

Neither...it is threaded onto the motor shaft. Lock the shaft at the end opposite the impeller and turn it off counter clockwise.

If this answer does not fix your problem, please comment with additional details prior to rating the answer. Positive feedback is appreciated once your problem is solved!

John

POLARIS SOFTUBE... | Answered on Dec 28, 2018


I'm not sure which pump fails after 15 minutes. Is it the main pump or the booster pump? The main pump works fine but when the booster pump is activated, one of them fails. What happens if you leave the main pump on and only activate the booster pump? Will the booster pump run indefinitely as well? They both share the same supply line. What have you checked so far? How old are both pumps?Do you pumps sound normal? Do the pump motors get abnormally hot? Any recent repairs or new symptoms? Is there a shut off valve on the supply line that has been turned/moved? Please write back with more information.

Polaris Pool &... | Answered on Sep 30, 2018


http://www.electricmotorwarehouse.com/PDF/polaris_manual.pdf

If you goto this link and scroll down to page 4, it shows what the wiring is.

Hope this helps. If so, please rate me for this.

Polaris Booster... | Answered on Sep 03, 2018


try setting thruster to 11:00 and is hose long enough make sure swivels are rotating

Polaris Pool &... | Answered on Aug 19, 2018


if power to motor from transformer when quits bad drive motor if no voltage to motor w2hen quits bad transformer

Polaris Pool &... | Answered on Aug 11, 2018

Not finding what you are looking for?
Polaris Logo

618 questions posted

Ask a Question

Usually answered in minutes!

Top Polaris Pool & Spa Experts

David Spradling
David Spradling

Level 3 Expert

10627 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

john h

Level 3 Expert

22486 Answers

Are you a Polaris Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...