Polaris Pool & Spa - Page 4 - Recent Questions, Troubleshooting & Support

the suction helps keep it grounded. make sure the impeller and filters are clean. a plugged impeller wil reduce its flow and let it tip over Polaris 9400 Sport See it in Action

check the filter in the wall of the pool where the Polaris line hooks up, it got a small filter in it. you are running it on low-pressure that's why it not sweeping, could also be a plugged impeller on the booster pump. Jay the pool pump motor repair guy Longwood Florida

Call an electrician qualified to make it right. Pool grounding and bonding are not for the DIY.

Curious to know why it needs shortening. The machine should have an automatic tensioner inside that keep the chain right. I am unaware of any way, or any need, to shorten the chain. Get on YouTube or a Polaris site to see if all your internal parts are present and functioning correctly.

The bearings may have seized, or some thing may have jammed the impeller and burnt out the motor, all you can do is free it up and if it works.

Take out the wall fitting of each of the two locking taps are probably gone there are restricted behind the wall fitting blue or red either remove or I stall

swimming pool polaris 9300 xi motor block not working