Quad Cycling - Recent Questions, Troubleshooting & Support


If there is no obvious connection, it may just be a breather hose for the engine.

Quad Cycling | Answered on Oct 23, 2019


Check for spark, there may be a "Kill Switch" or a key somewhere that needs to be turned in order for the motor to run. If you turn the motor over with a spare spark plug in the plug wire touching the tip of the spark plug that is in the motor it should show a spark. (It is best to do this in the dark to see the spark clearly)

Look for a fuel valve that shuts off the flow of gas typically located between the gas tank and the carburetor. Some carburetors have a float bowl drain at the bottom so you can drain the gas out for storage. If your carburetor has a drain bolt you can unscrew it and see if gas comes out.

Check for a choke lever or pull knob either on the carburetor or sometimes on the handlebars. I have also seen a primer bulb on the two stroke carburetors that act as a fuel enrichment for starting a cold motor.

Since it is new we can assume it has compression but it doesn't hurt to check it. Remove the spark plug, place your finger over the spark plug hole and turn the motor, if there is good compression your finger will pop off from the pressure.

If you have good spark, good compression and gas in the carburetor bowl chances are your carburetor jets are clogged. I would spray a small amount of starter fluid or a small squirt of gas into the back side of the carburetor after removing the air filter. If it runs for a few seconds then stops the problem is in the carburetor but most often the motor will continue to run and just needed priming. If it does not run on it's own there might be some debree in the float bowl obstructing the delivery of fuel but that is very rare for a new carburetor

Quad 47 cc / 49... | Answered on Sep 04, 2019


Need a new battery

Quad Cycling | Answered on Jul 06, 2019


have you tried a new spark plug???? try new sparkplug there may be a spark on the old one but it may not be strong enought, if that dont work you know its petrol problem!

Quad Cycling | Answered on Oct 13, 2018


Depends on size, load and usage. Check side of tire or manufacturer's info/website.

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Quad Cycling | Answered on Jun 21, 2018


The lower of the 2 screws is the fuel/ air mixture- the upper screw is the idle adjust screw

Quad 47 cc / 49... | Answered on Apr 19, 2018


a local dealer in galway ireland, got both for me! http://www.galwayquads.com/

Quad Disc Brake... | Answered on Jan 09, 2018


Google the make/model, or put in motorcycle area, not bikes.

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

Quad Cycling | Answered on Jun 24, 2017


All you have to do is Google "assemble chad valley quad" to find videos. One of these should work:
Redman and Associates 12V Quad Bike Assembly
6v Large Quad Bike assembly instructions

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881



Quad Cycling | Answered on Aug 18, 2016

Not finding what you are looking for?
Quad Logo

275 questions posted

Ask a Question

Usually answered in minutes!

Top Quad Cycling Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

NOEL
NOEL

Level 3 Expert

8546 Answers

Kardoc

Level 3 Expert

5488 Answers

Are you a Quad Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...