RCA Recent Questions, Troubleshooting Help & Support

Manual https://www.google.com/search?q=RCA+Model+RP5430A+manual ..

Television resolution, it will produce 1080i or 480p using the component input jacks. No way as sharp as 720p. This is of course dependent on your cable provider ..

MP3 players can only play music files in mp3 file format. You can download mp3 music files off the Internet, some WEB sites charge a fee for music downloads. OR
You need to convert your CDs to mp3 music files onto yourcomputer or download them from the Internet and then copy them to your MP3player.
You can do this using Windows Media player and Rip the CDs - Media Player willcreate a MP3 music file for each music track.
Click on this link for instruction on converting music files to mp3 file format:- http://www.fixya.com/support/r5798418-creating_transferring_mp3_music_files

There isn't one! Televisions, DVD and Set top boxes only. You buy a replacement Crossly remote from the maker. https://www.google.com/search?q=crossly+I+juke ..

clean all sensors inside, and optics. many sensors are full of lint, clean them out.

I assume "pilot light" is the standby light you're referring to. On most Funai brands including RCA, a continual flash of the standy light indicates inverter shutdown, pointing to bad LED backlights, new ones can be ordered from shopjimmy.com and you can install them yourself, no special tools are needed, however watch a couple youtube vids to see some tips on how to do it.

Erratic behaviour in CD players is mainly caused by 3 phenomena. Worn out laser, dust and dirt on the laser lens, problem with the sled-motor. When the laser is worn out, you get "no disc" all the time, as it is not able to find focus. The same happens with dirty lenses, but not always. Cleaning the lens is the solution. This is done with pure water using a cotton ear bud. NO alcohol or any other solvents may be used, as this might damage the lens coating, whereupon the unit is totally "screwed up." and has to be replaced. When random problems like skipping and jumping appear, even with new discs, there is a problem with the sled motor/mechanism. This mechanism "follows" the track on the disk. A common failure here is caused by collector contamination from the sled motor. As is turns very slowly, there is no self-cleaning effect from it's collector. Remedy: Take the motor out of the mechanism. It should be disconnected from any circuit in the player. Take a DC supply and make it spin for a FEW Seconds on 12-15V. Don't do it for a prolonged period as these motors are only ment for max 5V DC. By doing so, this cleans the collector and burns away the remainders of graphite located in between the collector sections. This graphite comes from the carbon brushes. After reassembly of the sled mechanism, slighty lubricate the two sliding rods with silicone oil f.i.. Check for smooth movent all the way. In general. Disassembly an reassembly of CD changers can be quite tricky. So take good care of the positions from gearweals, notches etc.

RCA remote control have no set-up code to Ilive brand devices. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

If you have an RCA 26211 remote, you can program it to control a DVD player by following these steps: 1. Press and hold the "Setup" button on the remote until the red light on the remote blinks twice. 2. Enter the code "9-9-1" on the remote. The red light will blink twice. 3. Press and hold the "DVD" button on the remote. The red light will blink twice. 4. Enter the code for your DVD player on the remote. The code will be four digits long. 5. Press the "Power" button on the remote. The DVD player should turn on. You can find the code for your DVD player in the manual that came with the player, or you can look it up online.

Sharp 011,020,025,027,037,052,053,059

cheers
Little Dish Fitter

Hi, You can first check for any debris in the video tape player and double check that no settings are stopping the tape from playing (ie a stuck rewind button) . Otherwise, please use the services of geeksquad/bestbuy to refurbish your vcr player. You might also check out BandH (?) video to see if they can refurbish your video tape player. Thank you.

RCA RV-9978 User Manual ' 28 pages - manualsdir.com

https://www.manualsdir.com > ... > RV-9978 User guide • Read online or download PDF • RCA RV-9978 User Manual • RCA Receivers and Amplifiers.

Question edited for clarity. Presumably the letter 't' on its own was supposed to be 'to'. The model number refers to a Sub Woofer. https://www.google.com/search?q=rca+sp9978aw+manual You should also search the receiver which you give no clue. make model manual https://www.google.com/search?q=rca+%28receiver+model%29+manual ..

If its under the 1 year warranty call 1800 252 6123 and they will do it no charge with any type proof of purchase, if over the 1 year they charge 45.00 maximum! and will repair it or replace it if it cant be fixed, then ship it back with a 1 year warranty, takes 4 weeks aproximately

RCA Service Menu Instructions In order to access the service menu on your RCA TV you will need to have a remote, if your remote is lost or damaged we recommend that you purchase a Replacement Remote before trying to access the service menu on your set. Method 1

1. Press the INPUT button on the remote.
2. Then press the 2, 5, 8, 0 buttons in quick succession.

Method 2

1. Press the MENU button on the remote.
2. Then press the 1, 1, 4, 7 buttons in quick succession.

Categories:

• RCA
• Service Menu

Of the thousands of models of TV's manufactured in the last 10 years with LED lighting there has never been a set with a fuse in the backlight section. Most likely the lamp strips are bad and need replacing

Hi, bluetooth means that you'll be using a wireless connection. You'll need t set the soundbar bluetooth connection on by first turning on the bluetooth connection within your Upstart 27 tv. Once the tv connection is on then you'll need to activate the bluetooth device search from your Bowfell and search for your tv in order to pair the 2 devices. You might need to reference the soundbar manual to understand what unique buttons on your device to use to move forward with the strategies that I've listed above. Thank you.

Is it a projection set without a model number I can only make a guess. If your using "component cables' on it, one of them isn't plugged all the way in or the cable broke while unplugging it, swap out the cble and let me know. Thanks Techman 57

Question edited for clarity. It is not a good idea to post your phone number to the 11 million annual viewers of this website. Try power cycling it. Remove the wall plug for 5 minutes and plug it back in. It looks like that set is a Walmart special, so it will be cheaply made. Try a factory reset https://www.google.com/search?q=RCA+42LED+reset ..

Are you sure the wall socket is ok , have you tried another outlet .