RCA Televison & Video - Answered Questions & Fixed Issues


After the main board replacement, there are some adjustments should be done. Sometimes, the firmware update too might be necessary. There are service adjustments too. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
https://homenol.blogspot.com/

RCA Televison &... | Answered 8 hours ago | 15 views


The applicable code would be in a compatible remote control.

RCA Televison &... | Answered 23 hours ago | 714 views


Make sure that hdmi output is activated in box setup. If there is no settings, turn off box, connect different cable and turn on tv and box. If still no go then possibly you have damaged hdmi output in the box

RCA Televison &... | Answered on Dec 03, 2019 | 30 views


PERHAPS IF YOU TRY RCA LOCAL RETAILER CAN DIRECT YOU TO A PLACE THAT FIXES THEM

RCA Televison &... | Answered on Nov 30, 2019 | 34 views


Use code search on your URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

RCA Televison &... | Answered on Nov 28, 2019 | 17 views


Open internal fuse or power supply failure

RCA Televison &... | Answered on Nov 27, 2019 | 24 views


HI,

if the display shows a progress bar when lowering and increasing the volume, that's a system built feature. you will not be able to remove that feature.

RCA Televison &... | Answered on Nov 22, 2019 | 30 views


You can't do anything without a remote. How can you not have a remote for it! Just buy a facsimile remote, the same as the old one.

https://www.google.com/search?client=piriform&ei=J-HWXfG-Ksm0ggfRhqvgDQ&q=model+le32b30+replacement+remote+control

RCA Televison &... | Answered on Nov 21, 2019 | 23 views


Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience.
http://electronicshelponline.blogspot.com/

RCA Televison &... | Answered on Nov 14, 2019 | 29 views


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

RCA Televison &... | Answered on Nov 14, 2019 | 46 views


This website lists 4-digit codes for the RCA D770.

If the devices you would like to control are not listed, try the RCA control code finder page here.

RCA D770 Remote... | Answered on Nov 13, 2019 | 380 views


In general the TV is not receiving any input. The fact that you lost HDMI and VGA earlier suggests that there is a breakdown in the input circuits.
Best guess, replace the main board. Symptom doesn't seem to indicate Power supply or TCon board
https://www.a2zelectronicparts.com/products/view/82546

RCA Televison &... | Answered on Nov 09, 2019 | 26 views


SOMETHING RINGS A BELL ABOUT A LATCHING RELAY GO SEE A REPAIR SHOP WITH IT

RCA Televison &... | Answered on Nov 08, 2019 | 25 views


I suspect that when adding your audio cables you may have bumped another cable loose. If you look and don't see a loose connection, one thing that has helped me in the past is to just remove ALL cables completely (that means both sides of all cables from all devices) and and slowly connect one device at a time, checking that the newly added device functions properly before proceeding to the next device.
Good luck

RCA Televison &... | Answered on Nov 07, 2019 | 505 views


The problem is with the lens assembly. sometimes you may have to replace it(lens assembly) or optical pickup

RCA DRC629N... | Answered on Nov 07, 2019 | 976 views


this might help
https://www.remotecodelist.com/remotes/rca/rca.htm
but you already searched for that, right?

RCA Televison &... | Answered on Nov 07, 2019 | 23 views


You download it from the manufacturers web site under support,

RCA DRC288SU... | Answered on Nov 05, 2019 | 92 views


I'm not sure what you mean by large black shadow, but it may be your screen that is failing. Ask friends for a honest repair person to look t it and tell you what they think the problem is. I wish I could tell you more,m but a large black shadow is not one of the symptoms I ever heard of.

RCA Televison &... | Answered on Nov 02, 2019 | 18 views

Not finding what you are looking for?
RCA Logo

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76173 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...