Roland Music - Page 5 - Recent Questions, Troubleshooting & Support
Roland cube street water damage repair
What part of it got wet will determine the course of action.If the whole unit were submerged, the unit may prove more time consuming to try to fix than to locate a used one. However, I have salvaged imersed laptops before. the procedure is not much different- make sure the unit is as dry as you can possibly make by blowing a fan on it for an extended period of time.- Days.Once dried, use some contact cleaner on the jack contacts and interupts, any manual control and any switch. You can then apply power. If nothing lights up, check and replace fuses as needed. Also check the power supply board for failed caps or rectifiers. Once the power supply is known to be functional, systematically check the LCD display and the aspects of the amp that it controls. This board will be the most vulnerable and most likely to be the source of most issues you will encountr. If the display survived intact, and amp does nto work, apply a signal to the inputs and trace the signal through the amp with a set of headphones set up with test prods. The problem will be where the signal stops.
Roland A-37 Controller
the article you shared is technical & difficult to understand but working for music is quite good & interesting. when ever igt busy with it best website to get essays i contact & manage things easily
best website for essays
7/6/2018 1:51:26 PM •
Roland Music
•
Answered
on Jul 06, 2018
I have a Roland FP 1 digital piano, serial
I first would suspect the switches on the eadphone jack. Normally these cut off the speakers when headphones are plugged in. These jacks and the switches are really weak, poorly made, and easily broken, especially if headphone cord gets yanked.
Not finding what you are looking for?