Samsung Cameras - Page 4 - Recent Questions, Troubleshooting & Support

honestly, the same thing happened to me and none of these answers helped, the camera was off but the lens was still out and had not closed back into the camera as it does when it normally turns off. The first time it happened i was using the camera in the winter and it was pretty cold out, i tried everything and nothing worked to fix it, everytime i turned it on it was unusable and a few seconds later it would turn off again and nothing had changed, I ended up forgetting about it and leaving it on my shelf for a few months and then in the summer I randomly picked it up and it was working fine again! I kept using it and didnt have any problems... until this year, 1 year later I once again bring it out into the cold on a winter hike, and now it is sitting beside me, once again unusable with the same problem as before, I guess I will have to wait another while, I will keep turning it on and off again every once in a while to see if anything changes, wish me luck.

You may have bad capacitors on the power supply. Replace capacitors or buy new power supply.

To unlock SAMSUNG GALAXY S2 use unlock code...Visit the site WWW.THEUNLOCKARENA.COM get unlock code and unlock it from network lock easily.To buy code you need to specify current network,country it is locked now and get code unlock it....Samsung Galaxy S2 Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Samsung Galaxy S2 mobile phones. If you enter over a certain amount of wrong unlock codes on your Samsung Galaxy S2 mobile phone, your phone may get hard locked and sometimes become unusable.

1 - Switch ON your Samsung Galaxy S2 with a NOT ACCEPTED SIM Card. 2 - Compose : #7465625*638*CODE# (or *#7465625*638*CODE#). NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Samsung Galaxy S2 is locked to. CODE: Its the unique Unlock Code for your Samsung Galaxy S2.

To Unlock Samsung U600 from network lock use unlock code..Visit the site Superunlockcodes.com get the code at low cost and unlock it easily.You can enter the unlock code in the Mobile using the unlocking instructions below:Samsung U600 Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Samsung U600 mobile phones. If you enter over a certain amount of wrong unlock codes on your Samsung U600 mobile phone, your phone may get hard locked and sometimes become unusable.

Method 1: 1 - Switch ON your Samsung U600 with a NOT ACCEPTED SIM Card. 2 - Samsung U600 will ask for "Password". 3 - Enter the Unlock Code. OR (if the Samsung U600 shows "Insert Correct SIM Card") Method 2: 1 - Switch ON your Samsung U600 with a NOT ACCEPTED SIM Card. 2 - Don't bother about what's being displayed on your Samsung U600. 3 - Compose : #0111*CODE#. NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Samsung U600 is locked to. CODE: Its the unique Unlock Code for your Samsung U600. If method 2 does not work, you can try method 2 again but this time without any SIM card on your Samsung U600.

Each Samsung U600 mobile phone has an unique unlock code. You can buy the unique unlock code for your Samsung U600 mobile phone using the form above.

This may depending on your Android version; I'd suggest trying the following ... OPTION 1 If you fail to unlock with pattern 5 times, you may be prompted for a backup PIN (hopefully you know that) or a "Forgot Pattern" button will appear. The forgot pattern button will ask for your google email & password; follow the prompts to gain access to your phone & create a new pattern. OPTION 2 If you have a custom recovery installed or USB debugging enabled, there are instructions here: Android Guide Hacking And Bypassing Android Password Pattern Face PI OPTION 3 Failing the above, you may have to do a factory reset. You'll lose any data/apps/accounts on your phone, but at least you can use it again. This method is detailed in method 2 here: How to Reset Your Android Phone

Try taking the ps4 and unplug power cord. ... to make it work was remove the power cord and switch it on, it will beep with a light and then die (without the cord) then when u start it up hold down the boot button till it beeps twice and it will rebuild the database...

Hi,

There is a chance that you don't have the correct or updated audio and video codecs installed.
Codecs are required for playing the latest video and audio files.

Go here and download and install XP Codec Pack. Restart your computer and try playing one of your video's.
Get XP Codec Pack here >>>>>






http://www.xpcodecpack.com/download







If you need anymore help please post back.

this particulat model cannot be used as a web cam, when you connect it to your computer it is detected as a removable device not an imaging device

hope this helps

I've had this problem too.
Your Samsung Digimax L80 accepts SD Card cards.The largest SD Card card you can use in your Samsung Digimax L80 is 2GB anything larger and it doesn't work.

There is probably a port underneath, with a screw-cap for protection, which you can open to let out the used electrons.

go to http://www.samsung-security.com/GET customer service support.God bless you

Here you go:

http://www.samsung.com/us/support/download/supportDown.do?group=&type=&subtype=&model_nm=SAMSUNG%20L830&language=&cate_type=all&dType=D&mType=SW&vType=L&prd_ia_cd=04010400&disp_nm=L830

install the latest firmware by downloading T-valdeuc-3009.2 from the samsung support page. I have been waiting for this fix for 6 weeks. I tested it this evening and it works. Unfortunately i think you will only get sd and not hd, but better than nothing

I think I can help you with this as I was baffled by the same problem myself.
All Samsung Digimax cameras use very high quality AVI (MJPEG) to record video.
In order to view this on your pc you need the Xvid codec which is available FREE here:
http://www.xvidmovies.com/codec/
You may also benefit from having the FREE divx codec package available at:
http://www.divx.com/en/downloads/postdownload/divx/win
I think you'll find that this will solve your problem.
Good luck!

try this:

Passkey:0000
or go to this website
http://www.alternativewireless.com/samsung/Samsung-WEP200G-quickstart.pdf

HI, You need create your account on samsung official website below. http://www.samsung.com/us/support/account and you can add your product.

You don't need any software. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.

Go to the following url and you will find the driver and manual: http://www.samsungcamera.com/customer/download/cus_down_main.asp?page=6&keyfield=&key=

Link

Hello,

Kindly consult this problem to your nearest Samsung Authorized Dealer as the possible problem is with the charger as it does not charge anymore. You can browse above link for Samsung Support Team.

Thank you.

down load samsung software plug usb cable in to camera turn camera on then plug in to computer . follow directions on screen .