Samsung Dryers - Recent Questions, Troubleshooting & Support


It can only be two things.

Burnt out element
Blown high limit thermostat
Burned out connectors

Check them with a test meter.

Samsung Dryers | Answered on Nov 12, 2019


Faulty door switch, Open dryer door, see if light comes on inside the dryer. If it does the door switch is good. If it doesn’t try resetting the breaker. *( dryer bulbs burn out) you may want to replace the bulb if light doesn’t come on before proceeding forward)
The start switch is another cause. You will have to unplug the dryer to check continuity.
A broken drum belt.
Turn timer on a cycle and listen for it making a ticking sound. You should as the timer is the least likely to fail, from my experience.

Samsung Dryers | Answered on Nov 08, 2019


The most likely issue with contacts in the drive motor. Youtube has videos on disassembly of the Samsung dryer. Unfortunately, the contact block does not have a replacement kit so the motor has to be replaced unless you have someone with electrical knowledge to repair contact. In some cases, contacts can be repaired with common knowledge but can't know how long the repair lasts. So far mine has been over 6 months. (the actual contact had fallen of the contact arm and I was able to brad it back in place).

Samsung Dryers | Answered on Oct 30, 2019


i don't know, this link may help. please note warning that your unit must have a proper ground wire connection. be safe.
https://www.samsung.com/ca/support/home-appliances/samsung-dryer-connect-the-electrical-wiring/

Samsung Dryers | Answered on Oct 30, 2019


Hi. Last night I went to check a dryer with the same problem. It turned out to be just a screen that the the wall vent has. It was completely plugged with lint. You may want to check that and make sure there's complete flow all the way to the outside of the house.

Samsung DV350AGW... | Answered on Oct 25, 2019


Check your vent who much air go out, your vent is 4 inch or small , need 4 inch vent with flapper open

Samsung Dryers | Answered on Oct 21, 2019


Applicare Inc. Oct 12, 2019
The belt is not moving and the motor pulley is spinning burning the belt.Check tension pulley, drum and drum rollers for unhindered rotation.

Samsung Dryers | Answered on Oct 12, 2019


Check for an obstruction in the vent. Vacuum and clean out the vent. If this is clear, check the thermistor located by the exhaust vent.

Samsung Dryers | Answered on Oct 02, 2019


i don't know. my dryer has 2 buttons. one turns on the display and then i have to choose a bunch of variables.
there is another button i use for start or stop. my dryer
will stop when i open the door but it holds my chosen program's variables so i can add or remove items, i can then close the door and restart it. this information may be of interest.

Samsung Dryers | Answered on Oct 02, 2019


Check the timer which is being set and also the adjustment of the dryer which might be loose n still rotates.

Samsung Dryers | Answered on Sep 24, 2019


Have you tried unplugging it for a minute or so?

Samsung Dryers | Answered on Aug 21, 2019


You'll need to quote the actual model number of the dryer, so that any specific information can be found.
Samsung make a bunch of different gas dryers.

Samsung Dryers | Answered on Aug 06, 2019


I can't find anything online about error code CL9. Even the owner's manual does not list that error code.


https://www.searspartsdirect.com/partsdirect/user-manuals/dv48j7700ewa202-samsung-parts-manual

Samsung Dryers | Answered on Jul 23, 2019

Not finding what you are looking for?
Samsung Logo

2,139 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Dryers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Mike

Level 3 Expert

4363 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a Samsung Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...