Samsung Dryers - Page 6 - Recent Questions, Troubleshooting & Support
I have samsung dryer 8 litres it shows E9 CODE
The only Samsung dryer code that is similar to E9 is 9E1 or E9E. On the SmartCare dryes (gas or electric), 9E1 a power or control board fault. You can try to reset it by unplugging the dryer for 5 minutes (unplug or trip the circuit breaker). If the error recurs, make sure that the incoming voltage supply is between 105 and 130 VAC. If the voltage is correct, then replace the control board. E9E indicates the same problem on other Samsung dryers.
There are some Samsung dryers that may share parts with the Maytag/Whirlpool lines. On these, the E9 error is a door switch failure. Check the latch and hinges. Next check that the switch has the correct resistance across it. Check the wiring, including all contacts and the wiring harness. Replace the control board if the rest of the system is fine.
Please add a comment with your model number for more information.
I hope this helps.
Cindy Wells
Not finding what you are looking for?