Samsung Audio Players & Recorders - Page 5 - Recent Questions, Troubleshooting & Support
Half of my TV screen is 3D all the time
Hello,
It's seem to be a T-Con board problem. If you don't deal with electronics repair, call to a service center. If you deal with it, first thing is to search for service manual or schematic diagram. For more articles on how to repair this issue visit jestine's yong blog.
Cheers !
10/9/2020 9:02:52 PM •
Samsung...
•
Answered
on Oct 09, 2020
I want to convert all video to wmv samsung q2
There is a free program out there called Super Video Converter. It will take any video and/or audio input and convert it to another video codec.
It can be found at the following link:
http://www.erightsoft.com/SUPER.html
Cannot get BluRay/DVD system to
Yes, the reason for this is that the BD-Receiver/TV button was pressed
twice. This button has 2 modes of operation depending on the color it
flashes when you press any button on the remote. If the BD-Receiver/TV
button flashes green then it is in TV mode and if it flashes orange then
it is in BD Receiver mode. The way to switch between the 2 modes is
simple but not intuitive and easily not noticed. Simply press the
BD-Receiver/TV button it will light-up green or orange, depending on
what mode it is in, for about 1 second. The trick is to quickly press it
again BEFORE the light goes out. When this is done the color of the
light will change. If it was green it will change to orange and vice
versa. Rember, Orange = BD Receiver function Green = TV
Hope this solution has been helpful?
Thank you for visiting FixYa.
7/5/2020 5:35:25 AM •
Samsung...
•
Answered
on Jul 05, 2020
Samsung HT Q20 dvd player saying No DISK
Hi,
1. Try cleaning the drive laser lens with a CD lens cleaner.
2. You need to check servo parts, spindle motor and pick up flat cable.
3. Clean laser lens manually.
Success!
My Samsung 3D player HT-E6750W turns itself on and off any help please
SOLUTION: This was happening to us for over 6 months, lately its every few minutes, i just figured out its due to faulty front touch pad, if you open the unit and remove front face of the player, remove the single small ribbon wire that connects to front touch pad, leave the other little ribbon wire as this is for the remote control IR receiver, only the remote control can work with this now obviously.
Not finding what you are looking for?