Sansui Televison & Video - Page 6 - Popular Questions, Answers, Tips & Manuals

If you wish to get some details; visit the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done. NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important. Search the site by type in the "brand name" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. /

Sansui model - LCD TV s 3281Yw-M I need sarvice mode code plz tell

I get all my firmware updates from this site Home Page

You should have a remote control to proceed. No other way. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites. https://homenol.blogspot.com/ https://electrohelponline.blogspot.com/ https://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

https://www.manualslib.com/products/Sansui-A-5-3953812.html Sansui 5 Manuals

Have you tried the flashlight test

I could not locate a manual for this product. It appears to have been sold in the past in South Africa at HIFI Corp. For Windows PC, Audacity if free. https://sourceforge.net/projects/audacity/ There are also software programs for sale, such as LPRecorder. For Apple Macs, Garage Band can record.

have u tried the hdmi adaptor what comes with the fire stick

Then you must take it to the service absolutely

There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done. /

I am not familiar with the tv brand but if the tv is designed to work on the local video standard and frequencies you should not need a converter box though there are a few different antenna connectors in use and you might need to buy an adaptor or change the plug on your antenna lead.

can you see the tv control menu for brightness, etc? if not, then the screen is dead. otherwise, unless you know how to inspect and replace electronic components such as capacitors, you may as well replace it.

The chances are you may have to reset the TV to FACTORY original values. Doing so may require setting up certain commands all over again, but the reset is a way to clear the memory of conflicting issues and allow you to reconnect the USB ports once again.

http://www.vintageshifi.com/repertoire-pdf/Sansui-3.php Similar model G-E750 link has a schematic. Please click Helpful or Not Helpful to respond to this suggestion.

Go to HiFi Engine and you can find it there

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. https://homenol.blogspot.com/ http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main digital board./

Do you have a multi meter and able to take some voltage readings?

Sansui HDLCD3200 Owner Manual Troubleshooting Free manual with some Troubleshooting steps.

Go into menu then service options click on normal for picture flip, and it will go back to being right

It sounds as if the color controller/circuit board is becoming sensitive and may soon disconnect. Don't be surprised if someday soon, the picture goes very dark or vanishes completely. Have a technician check it out with his test equipment to locate the exact problem.