Savin Office Equipment & Supplies - Recent Questions, Troubleshooting & Support

The contacts on the fuser may need polishing, or control boards that operate the fuser are faulty. Call for service.

Hi, please check for the fuser behind or around the drum units of your Savin printer. This is a common location for this item in printers in general. Thank you.

Check your controller boad ram connection and wash it to eraser then back to conect it also look hdd conection then go to sp mode copy sp and go to 5801 to memory all clear then execute then main switch off then on.your problem is solved.

https://www.google.com/search?q=replace+waste+toner+on+Savin+9060 ..

https://www.manualslib.com/manual/1039262/Ricoh-D065.html?page=226#manual

Kenneth: I would remove and cover the drum carriage (to protect the drum from damage by exposure to light), and check and clean the corona wires. There is a charge corona and a transfer corona, so that's two coronas that you'll have to clean. If you can remove the coronas from the machine, you can do a better job of cleaning the coronas. A faded line down the page like you're getting could be a paper shard stuck to one of the coronas... it's been known to happen.

This indicates that the harness and/or the td sensor on the black pcu has gone bad. It is recommended to replace the black pcu to resolve the problem.

That code is most likly fuser code, could be blown fuse, or fuser may have to be reset by getting into service mode, Yellow key 107 red key, now in svc mode. look for tab that says mode. depress and look for code to reset fuse coul be 5810 and depress excute. turn on off that should reset fuser if code comes back you have bad fuser, fuser, lamp etc.

check 1. transform unit ware connection 2. clinging the transform unit 3. reply's the transform unit

sc 590 is an exhaust fan motor error the fan could be failing as for the copy quality the pcu will probably solve that problem

see if you can find its manual here if you dont have one,might help you out... https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=Savin+4035esp+printer+manual

first try hitting the # key , then select thick paper 2, ok, then try to copy again..

this changes heat and speed settings.

as the check is scanned the optics are reading a security code imbedded in the paper that prevents the check from being copied it will probably do the same if you try to copy paper money.

that would be a machine malfunction already try to see the entrance of the printer near the ribbon if attached correctly maybe some small parts have been malfunction near the cartridge slot

Try taking off the back covers of the machine, especially the bottom back cover. It may allow you to look into the tray from the back of the machine and allow you to see what is obstructing the tray from being pulled out. Good luck.

remove the used bottle. Turn off the machine. Turn on the copier and follow the directions. If it does not work, turn it off again, put in a new bottle then turn on. If that doesn't work, turn it off and try to get a refund on your new bottle of toner.