SEIKI Digital Computers & Internet - Popular Questions, Answers, Tips & Manuals
Power indicator on, logo flashes briefly, but then no picture. What's wrong?
? 1:38
https://www.youtube.com/watch?v=cWpF4q_rBaw
Oct 19, 2014 - Uploaded by EurekaRecycler
SEIKI Tv SC501TS has audio but no video, repair ... LCD & LED TV Repair - No Image & Blank Black Screen Flashlight Test - How to Fix LCD ...
? 2:57
https://www.youtube.com/watch?v=-TU2KSuect4
Mar 4, 2014 - Uploaded by ShopJimmy.com
Learn why your screen is blank and you have audio - No image LED TV Repair Review Main Board Problems ...
Why seiki 40 inch has gray screen no picture but has sound
It's possible the Monitor has failed, but here's some tricks I would try...
1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or orange or flashing, but nothing displays, or the display is incorrect, borrow a monitor from a friend. If that works, your monitor probably needs replaced.
7. Also, you could try your display on a friend's computer. If it doesn't work, your monitor probably needs replaced. If it works properly on your friends computer, the problem may be with your computers video output port, motherboard video chip (or video card, if you have one), or drivers.
Good luck.
Onity machine error showing no valid data connect to pc , what can i do for that ...
Here are some steps you can take to troubleshoot and resolve the issue:
Connect the Machine to Your Computer:
First, ensure that your Onity key machine is properly connected to your computer. You can use either a USB or Ethernet connection, depending on your machine's configuration.
Be cautious not to damage any of the connections while setting up.
Launch the Access Control Software:
Once the machine is connected, launch the access control software provided by Onity.
Double-check that all the information (such as username and password) is correctly entered.
Select the "Reset" Option:
From the software's main menu, choose the "Reset" option.
You'll be prompted to enter an authorized user ID and password assigned to the machine's operator account.
After verifying these credentials, you can enter the reset mode.
Input New Credentials:
While in the reset mode, input new credentials for the machine.
Set a unique password and click "OK".
Remember this password, as you'll need it each time you use the key cutting device.
Confirm the Reset:
Confirm the reset by clicking "Yes" on the confirmation prompt.
Wait until the process completes successfully.
The machine will reboot automatically after a few seconds.
If you encounter any issues during this process, consider reaching out to Onity Tech Support for further assistance.
I can't leave a comment after logging in..
Anywhere in particular? You seem to managing just fine here!
https://www.fixya.com/users/atos-maximus
For some strange reason you are answering Solved questions from August 2012??
..
Not finding what you are looking for?