Shakespeare Sport & Outdoor - Others - Recent Questions, Troubleshooting & Support

Here are the steps to properly install the spring in a Shakespeare Synergy 2001S reel:

1. Remove the spool from the reel.
2. Locate the bail wire assembly on the side of the reel.
3. Take the spring and slide it onto the bail wire assembly. The smaller end of the spring should be facing towards the reel.
4. Hold the spring in place and reattach the spool to the reel.
5. Test the reel by pulling the line out and then closing the bail. The spring should be under tension and hold the bail in place.

If the spring is not holding the bail in place or is not properly installed, the reel may not function correctly. If you are having difficulty installing the spring, it may be helpful to consult the owner's manual or a professional for assistance.

Question edited for full 'make model (what it is)'. Question moved from Cars and Trucks. See if this helps or send it to Mike's Reel Repairs. https://www.google.com/search?q=synergy+2000+reel+assembly+instructions ..

Shakespeare Spinning & Spincast Schematics - Reel Schematic

https://www.reelschematic.com > reel-schematics > shak...

Shakespeare Spinning & Spincast Schematics. Shakespeare 41-30 ... Shakespeare Ez Cast 6 (229k) ... Shakespeare Ugly Stik Catfish USCATSP50 00 (322.8k).

Shakespeare Reel Schematics - Reel Schematic

https://www.reelschematic.com > reel-schematics > shak...

Shakespeare Reel Schematics. ... Shakespeare Tidewater Schematics · Shakespeare Ugly Tuff Schematics · Shakespeare Wild Schematics · Shakespeare Zata ...

Shakespeare Parts - Mikes Reel Repair

https://www.mikesreelrepair.com > reel-parts > shakespe...

Shakespeare Fishing and Pflueger Fishing are now owned by Pure Fishing. As such, all the newer parts will be listed in one section under Ambassadeur Parts.

alright man......i had the same problem. it just takes a little bit of elbow grease, bot it does twist open, it's just harder than hell to get it to twist off. I took a towel and laid it over the reel, and lightly tapped on it with a hammer to loosen it up a bit.

bring it to the repair master

you mean a spincast reel... NO more than 10lb... the line gets too big to work smoothly..and it fills the reel too quick!!

try here.. https://www.mikesreelrepair.com/

no notify Shakespeare

https://ontariofishing.com/Fly-Reels-Vintage-Shakespeare-Silent-Tru-Art/

http://s7d5.scene7.com/is/content/purefishing/skp-ownerM-ezCast http://www.shakespeare-fishing.com/customer-service/Shakespeare-customer-service.html

Mike Reel Repair Fishing Reel Parts Service http://www.davesreelservice.com/

Sorry we don't have that.

see if you can find it here. MANUAL FOR SHAKESPEARE BAIT CASTER SRBC 100 Google Search

Shimano b-mag 1000 fishing reel manual -

momot-guitars.com/en/.../shimano-b-mag-1000-fishing-reel-manual?... Jul 22, 2015 - Download Shimano b-mag 1000 fishing reel manual >> Download ...

There should be a switch on the bottom end off the reel that should stop this.

We had this same issue with an open faced and when we pulled the top off the plastic gears were stripped. Now this may not be the case with yours, but you should try to tighten the drag then open it up and check the gears.

try wd40

you just have to unscrew the little screw that is on the opposite side as the reel and sometimes the reed will actually unscrew. You just unscrew it and screw it back onto the other side

The switch is the on/off anti reverse switch. It is the switch (probably the only one) on the reel at the base. When the reel is in the upright position, look at the bottom/rear area. That little level controls the reverse. Good fishing...

You might want to check the numbers you provided. I found this site to have a lot of diagrams for the manufacture you provided. Mikes Reel Repair Schematics