How to stop the agitator from turning as I try to unscrew it
To stop the agitator from turning as you try to unscrew it on a Simpson Enduro 801 washing machine, you will need to first unplug the machine from the wall outlet. This will ensure that the motor is not running and the agitator is not turning.
Next, you can try using a pair of pliers or a wrench to hold the agitator in place while you unscrew it. Simply grip the agitator firmly and apply enough pressure to keep it from turning as you loosen the screws.
If the agitator is still turning or you are having trouble keeping it in place, you may need to apply additional leverage. One way to do this is to use a piece of wood or other flat object to act as a lever against the side of the agitator. This will help to keep the agitator from turning as you loosen the screws.
How do i fix error E17 on a simpson ezset 7.5 top loader
E17 means the machine has gone out balance. Normally, if you untangle the clothes and shut the lid, it will start again. If it doesn't, it may have damaged the out of balance lever under the top of the cabinet. It may also mean that the clutch has failed and the machine is only washing in 1 direction. This will tangle the clothes and cause it to go out of balance every load. Have a look under the machine, if there is black / brown oily stains all over the bottom of the cabinet, it is almost certain the clutch has failed. In most cases, its cheaper to buy a new machine.
Simpson 950 washing machine shows error code E50
hi there, i have the same machine and just got the E50 after son loaded the machine, ...
to correct it i pulled out the load of washing, turned machine off and also at the powerpoint for a couple of minutes...- if you do not turn off at the powerpoint , the machine will continue to give E50.
i then reloaded machine with half of sons load and had no problem after.
note: his jeans and jacket was wound tight around the agitator and the load was way too full.
hope this helps you. :)
Not finding what you are looking for?