Simpson Recent Questions, Troubleshooting Help & Support

Check your answers on the How to mend it site or didn't you like the answers you got over there?

No it does not.

What is a simpson 711??

You first have to pry the cap off the wheel with a screwdriver then under the cap there should be either a pin which you pry off or a nut which you loosen.

I had the same thing and then discovered the "five" is an "S"... Start/Pause .. press the button.

You machine may have lost a spring. I would recommend removing the back and place all bolts in a cup. Do not forget to unplug first. Then take a look at any thing out of place.

i would try a new capacitor,located under the main top panel,its a round cylinder with two wires on it

check the lid switch,it is activated by a magnet set into the lid,magnet may be gone or switch is faulty

i would say its likley that the suspension rods are worn out and need replacing

problem program board or switch

if this is a top loader, the suspension rods need replacing

http://www.manualslib.com ManualsLib Makes it easy to find manuals online i'd serach for service manual on this link or other free pdf site

either a clutch problem or a faulty capacitor which is easy to replace it is located under the top control panel a round unit with a wire connector going to each side