SNK Televison & Video - Recent Questions, Troubleshooting & Support
No picture or sound magnavox 42MF231D/17 only 2 of the green blinking lights are working
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
Magnavox television won't stay on
I know this is going to sound strange but I have something to check. If you have LED lights in your house turn them all off. When they are off turn on your TV and see if your TV stays on. Yes, there could be many problems but this one is cropping up quite a bit. If this does not work then you need to take a look at the power supply board.
I need a remote for my tv
Check on ebay. Sellers 90% of the time will have your model no. or equivalent. If you are not sure if the remote is working and you have access to a video or camcorder - point the remote directly at the camcoder and press the buttons whilst looking through the viewfinder you should see the remote's led firing when you press the buttons.
Off standby
Main system control memory IC fault. This IC is soldered on the main board. Contact any service technician to replace it.
If you wish to get some details; check the site linked here.
Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
Why dvd player want work
Disc loader mechanism fault. Either a broken belt, damaged loading motor or any gear wheels can poise this problem. Contact any service technician. The mechanism should be take out from the set for repair.
Discs inserted does not loading properly to exact seating; is the problem.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/
No image on screen
If you have sound the inverter board has failed,or one of the ccl lamps has died .when you switch on the powersupply sends power but on receiving a fault condition from either of the two faults above will shut down power to the inverter board.
Not finding what you are looking for?