Sony Logo

Sony Recent Questions, Troubleshooting Help & Support

Do you work here? Claim your company

  • 15K Products
  • 480K Answers

That is a video fault.
Five blinks
- AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video.

Sony KLV32S400A... | Answered on Jan 03, 2020

An LED TV is still an LCD TV, just with LED backlighting. That model is an LCD TV. The difference is in the backlight. Both LED and LCD TVs use an LCD screen. LED TVs have LED backlighting of the LCD screen, which saves energy.

Sony KLV32S400A... | Answered on Jan 03, 2020

Hi John, I searched under "error code 71101 sony VCR" you'll get quite a few hits including fixya but there are several others which could be worth a look.

Sony Televison &... | Answered on Jan 03, 2020

For DVD ROM discs, data files in DivX 3.11 / 4.x / 5.x / 6 format can be played. If it's not playing, then there's a custom codec the video must have been created in, and the player won't be able to playback

Sony DAV-DZ100... | Answered on Jan 03, 2020

This is the correct link for the DAV DZ100 firmware:

Try this, it shoul solve the problem!
Bye, Davide (

Sony DAV-DZ100... | Answered on Jan 03, 2020

No you cannot upgrade the system to play Dvix .
Thank You

Sony DAV-IS10... | Answered on Jan 03, 2020

no, you need to get diffrent films.

Sony DAV-IS10... | Answered on Jan 03, 2020

It may be dust built up and you have to get a DVD insert that's made especially for cleaning the inside of the player

Sony Televison &... | Answered on Jan 03, 2020

  • Check the disc you're using for scratches and dirt. If the disc is damaged it won't play properly, regardless of the CD player's ability to function. You can use a CD repair device like the "Disc Doctor" to repair the CD or purchase a new CD.

  • Clean the laser lens with a CD laser lens cleaning disc. CD laser lens cleaning discs can be purchased at most electronics retailers or online. Insert the laser lens cleaning disc and follow the instructions.

  • Insert a correctly-formatted, undamaged disc into your player. Listen to see if it begins to read the disc. If it continues to make no sound and gives you the same message, then the problem is probably that your disc is not spinning in the device.

  • Clean the lens while the DVD player is open. A dirty lens is most likely the cause of your no-disc error. The lens should be cleaned with isopropyl alcohol and a cotton swab.

  • Sony CMT-EP505... | Answered on Jan 03, 2020

    One note my friend don't buy SONY they have propriety tech on they're lenses that has poor Pickup on some CD\DVD's.

    Sony DVP-NS55PS... | Answered on Jan 03, 2020

    Might be.

    Sony DVP-NS55PS... | Answered on Jan 03, 2020

    The mp4 files must be maximum 320x240 resolution, any larger and it will tell you that the file is not supported. If the mp4 is created with any profile other than "AVC Baseline" it will tell you the file is corrupted. It also won't do DRM, but I can't remember what, if any, DRM systems typically get used on mp4 files.

    Sony NWZ-E438F... | Answered on Jan 02, 2020

    might want to check the parnet settings on the system

    Sony PlayStation... | Answered on Jan 02, 2020

    If you normally use this DVD in a computer or laptop to view your training, that may be the problem. DVD players that are used to view movie DVDs must be "finalized" after recoding in order to be playable on non-PC type DVD players.

    Sony TV & Video... | Answered on Jan 02, 2020

    Not finding what you are looking for?

    Ask a Question

    Usually answered in minutes!

    Top Sony Experts

    The Knight
    The Knight

    Level 3 Expert

    76237 Answers


    Level 3 Expert

    13434 Answers


    Level 3 Expert

    85223 Answers

    Are you a Sony Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides