Sony Audio Players & Recorders - Page 3 - Recent Questions, Troubleshooting & Support
How do i fix my sony mhc-gnz888d reject and stand by problem?
The "Eject" and "Standby" display issue on your Sony MHC-GNZ888D could be caused by a variety of factors, ranging from simple glitches to more complex hardware problems. Here are some troubleshooting steps you can try to address the issue:
- Check Power Source and Cables:
- Ensure that the power source and power cables are properly connected and providing a stable power supply to the system.
- Try plugging the Hi-Fi into a different power outlet to rule out any issues with the electrical supply.
- Reset the System:
- Unplug the Hi-Fi from the power source and wait for a few minutes.
- Plug it back in and try turning it on again. This can sometimes reset any minor glitches in the system.
- Remove and Reinsert Discs and Tapes:
- If you have any discs or tapes in the player, remove them and make sure there is nothing obstructing the mechanisms.
- Disconnect External Devices:
- Disconnect any external devices (USB drives, smartphones, etc.) that are connected to the Hi-Fi and try turning it on again.
- Check for Jammed Mechanisms:
- Open the disc tray (if applicable) and visually inspect for any obstructions or jams. Gently remove any foreign objects if you find any.
- Cassette Deck Maintenance:
- If you're not hearing the usual clicking sounds from the cassette deck, there might be an issue with the mechanisms.
- Try opening the cassette compartment and visually inspect the mechanisms for any obstructions or damage. Ensure that the cassette deck is clean and free of debris.
- Cooling and Ventilation:
- Make sure the Hi-Fi has proper ventilation and is not overheating. If it gets too hot, it might automatically go into standby mode.
- Seek Professional Repair:
- If none of the above steps resolve the issue, it's possible that there might be a more serious hardware problem.
- In such cases, it's recommended to contact Sony customer support or a professional audio equipment technician for further diagnosis and repair.
Remember that working with electronic equipment carries inherent risks, and if you're not comfortable or experienced with troubleshooting and repairs, it's best to seek professional assistance to avoid potential damage to the equipment or harm to yourself.
So, this Sony 60 disc stereo model MHC-GS100 won't rotate cd's and just continuously makes a grinding or motor turning noise but tray doesn't move.
There are a few possible reasons why your Sony 60 disc stereo model MHC-GS100 won't rotate CDs and just continuously makes a grinding or motor turning noise but the tray doesn't move. Here are some of the most common causes:
- The CD drive belt is worn out or damaged. The CD drive belt is responsible for moving the CD tray and the CD itself. If the belt is worn out or damaged, it may not be able to move the tray or the CD.
- The CD drive motor is faulty. The CD drive motor is responsible for rotating the CD. If the motor is faulty, it may not be able to rotate the CD.
- The CD drive gears are worn out or damaged. The CD drive gears are responsible for moving the CD tray and the CD itself. If the gears are worn out or damaged, they may not be able to move the tray or the CD.
- The CD drive control board is faulty. The CD drive control board is responsible for sending signals to the CD drive motor and gears. If the control board is faulty, it may not be able to send the correct signals to the motor and gears.
If you have checked all of these possible causes and you are still having problems with the CD drive, you should contact Sony customer support for help.
Here are some tips to help prevent this problem from happening in the future:
- Do not overload the CD drive. Overloading the CD drive can put unnecessary strain on the drive and can lead to premature wear and tear.
- Do not use damaged CDs. Using damaged CDs can damage the CD drive.
- Clean the CD drive regularly. Cleaning the CD drive can help to remove dust and dirt that can build up and cause problems.
I hope this helps!
I have a sony S-master CMT-SPZ50 and everytime i turn it on and my music starts playing it goes straight to standby and has been doing this for weeks now. how do i fix this?
If your Sony S-Master CMT-SPZ50 audio system keeps going into standby mode shortly after turning it on, there are a few troubleshooting steps you can try to resolve the issue:
- Power cycle the system: Turn off the audio system and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can help reset any temporary glitches or issues.
- Check the speaker connections: Ensure that all the speaker wires are properly connected to the audio system and the speakers themselves. Make sure there are no loose or frayed wires that could be causing a short circuit or interruption.
- Disconnect external devices: If you have any external devices connected to the audio system, such as smartphones or MP3 players, try disconnecting them to see if the issue persists. Sometimes, an incompatible or malfunctioning external device can cause the system to go into standby mode.
- Reset the system: Look for a reset button or option on the audio system. It could involve pressing a specific combination of buttons or using a small reset pinhole. Refer to the user manual for instructions on how to perform a system reset.
- Check for overheating: If the audio system is located in a confined space or if the vents are blocked, it could lead to overheating and cause the system to go into standby mode. Ensure that the system has adequate ventilation and is not exposed to excessive heat.
How do I fix Sony CDP-CX355 that keeps continually moving the carousel back and forth and never goes all the way around?
If your Sony CDP-CX355 CD player keeps moving the carousel back and forth without completing a full rotation, it could indicate a mechanical issue. Here are a few troubleshooting steps you can try:
- Power cycle: Turn off the CD player, unplug it from the power source, and wait for a few minutes. Then, plug it back in and turn it on. Sometimes, a power cycle can resolve temporary glitches.
- Reset the player: Look for a reset button or option on the CD player. This could involve pressing a specific combination of buttons or using a small reset pinhole. Refer to the user manual for instructions on how to perform a reset.
- Check for obstructions: Inspect the carousel and the area around it for any obstructions. Remove any CDs or debris that may be blocking the movement of the carousel. Ensure that there are no loose parts or foreign objects interfering with the operation.
- Clean the player: Dust and dirt can affect the performance of the CD player. Use a soft, lint-free cloth to gently clean the surface of the player, including the carousel and any accessible internal components. Be cautious not to apply excessive force or use liquids that could damage the player.
- Lubricate the carousel mechanism: Over time, the carousel mechanism may become stiff or dry, causing issues with rotation. Applying a small amount of silicone-based lubricant to the moving parts of the carousel can help improve its movement. Use a lubricant specifically designed for electronic components and follow the instructions provided.
Hey i have a sony dav tz715 i have a prob with the sound
It seems like you're experiencing an issue with the sound speakers on your Sony DAV-TZ715 system when using the USB function with RFD multi mode. However, the problem resolves itself when you switch to other functions like TV. There could be a few potential causes for this issue:
1. Interference: The USB function may be more susceptible to interference, which is causing the noisy sound on the SUR L and R speakers. This interference could be originating from the USB source itself or other nearby electronic devices.
2. Compatibility: There could be a compatibility issue between the USB source and the RFD multi mode on your Sony system. It's possible that the USB source's audio format or settings are not fully supported by the RFD multi mode, resulting in the noise issue.
3. Firmware or software issue: There might be a firmware or software problem with your Sony DAV-TZ715 system. It's worth checking if there are any firmware updates available for your system that could potentially resolve the issue. You can visit the Sony support website or contact their customer support for assistance with this.
To troubleshoot the problem, you can try the following steps:
1. Test with a different USB source: Connect a different USB device or try playing different audio files from the same USB source to see if the issue persists. This will help determine if the problem is specific to the USB source or if it's a more general issue.
2. Check audio settings: Explore the audio settings on both the USB source and the Sony system. Make sure the audio format and settings are compatible with the RFD multi mode. You can refer to the user manual of your Sony DAV-TZ715 system for instructions on adjusting the audio settings.
3. Isolate interference: Move the USB source away from other electronic devices and potential sources of interference, such as Wi-Fi routers, cordless phones, or microwave ovens. This might help reduce any external interference that could be affecting the sound quality.
4. Perform a factory reset: If none of the above steps resolve the issue, you can try performing a factory reset on your Sony system. This will reset all settings to their default values. Refer to the user manual for instructions on how to perform a factory reset.
If the problem still persists after attempting these troubleshooting steps, it's recommended to reach out to Sony customer support for further assistance. They will have access to specific knowledge about your Sony DAV-TZ715 model and can provide more specialized guidance in resolving the issue.
My Sony RCD-W100 is ten years old but can no longer record on today's blank CDs. Can Din Unlock allow use of today's crop of CD-R blanks?
The "Din Unlock" feature on the Sony RCD-W100 is designed to allow the recording of audio CDs from external analog sources. It is not directly related to the compatibility of the device with different types of CD-R blanks.
If your Sony RCD-W100 is not able to record on newer CD-R blanks, it could be due to a few reasons:
1. Incompatibility: The device may not be compatible with the specific type or brand of CD-R blanks you are using. Different CD-R blanks have varying quality standards, and older recording devices may have limitations in recognizing or writing to certain types of discs.
2. Firmware/Software Update: Older recording devices may not have firmware or software updates available to support newer CD-R formats. Check the Sony support website to see if any updates are available for your specific model.
3. Aging Laser: Over time, the laser in the recording device may deteriorate, making it less effective at recording on CD-R blanks. This is a common issue with aging optical drives.
To address these concerns, you can try the following steps:
1. Update Firmware/Software: Check the Sony support website for any available firmware or software updates for your model. Installing updates may improve the compatibility of the device with newer CD-R blanks.
2. Try Different CD-R Blanks: Experiment with different brands or types of CD-R blanks to see if the device recognizes and records on any of them. Higher-quality CD-R blanks may have better compatibility.
3. Clean or Service the Device: If the device has been in use for ten years, it may benefit from a thorough cleaning or servicing. Dust or debris on the laser lens can affect its performance. Consult the device's user manual or contact Sony support for guidance on cleaning or servicing the unit.
If the above steps do not resolve the issue, it may indicate that the recording device has limitations that prevent it from working with newer CD-R blanks. In such cases, you may need to consider upgrading to a newer recording device that supports the latest technologies and formats.
Sony TA-SA300WR surround amplifier red light keep blinking
Does it blink to the beat of the sound or is it flashing? If it's flashing with no audio it usually means overheating.
If it beats to the music it's usually is a warning that you are "clipping" which means you're overdriving the amplifier This can damage the speakers and overheat the amplifier.
Avoid red lights by having each stage of amplification not exceed 95%.
Not finding what you are looking for?
