Sony BRAVIA - Recent Questions, Troubleshooting & Support - Page 8


Time to repair the power supply. Replace all swollen capacitors with identical values.

Sony Bravia... | Answered on Aug 06, 2017


you must get this from Sony: http://esupport.sony.com/US/p/model-home.pl?mdl=KLV32U100M&LOC=3&session_id=221047ee10c5a4a88875f2358d43b222#/howtoTab

Sony BRAVIA... | Answered on Aug 04, 2017


I have same problem with klv-32t550a i thinkk this is a error of display card

Sony Klv-32t550a... | Answered on Aug 04, 2017


I will try a new T-CON board first.

Sony BRAVIA... | Answered on Aug 02, 2017


its the t-con board if the backlight is coming on and there is sound then the t-con board is faulty. this is the board on the back of the screen has a cable going to it from the main av board. replace with same part number only. this has to match the screen.

Sony BRAVIA®... | Answered on Jul 15, 2017


Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Sony BRAVIA... | Answered on Jul 11, 2017


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Sony BRAVIA... | Answered on Jul 05, 2017


The only solution to this problem would be to contact Sony directly and order a stand.

TVs are sold in the box with one single stand and the electronics stores don't receive extra stands to sell to customers. Ordering a stand from the manufacturer generally costs less than $100.

Sony Bravia... | Answered on Jul 01, 2017


If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.
Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts...

Sony BRAVIA ... | Answered on Jun 27, 2017


Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

Sony BRAVIA... | Answered on Jun 25, 2017

Not finding what you are looking for?

-2,822 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Televison & Video

  • Forum

View Most Popular

  • Sony Televison & Video
Loading...