Sony S - Recent Questions, Troubleshooting & Support - Page 3


High definition ready is different to Full High defintion for the simple reason the software is different to prove play a HD play station game on both and you will immediately see the difference in picture quality however the difference is not so significant on your normal satellite HD channels depending on the resolution the TV can produce

Sony KLV-S32A10... | Answered on Nov 23, 2010


That HDMI port hub it properly shorted,tries used another HMI ports hub?Tries to reset the tv back to factory setting,by unplug,replug it an hour later,go to the tv menu go to PICTURE,go down to reset.So the Tuner board reset itself back to the factory setting,all the HDMI ports hubs,should work now or that HDMI port hub is shorted,or the Tuner board it dead.

Sony KLV-S32A10... | Answered on Jun 11, 2010


Ur Main Tuner signal board is dead.Replaced this board will fix this problems.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish Tuner signal board for the replacement.

Sony KLV-S32A10... | Answered on Mar 13, 2010


Ur lamp is dead,replaced the lamp.

Sony KLV-S19A10... | Answered on Feb 17, 2010


this may be a problem on the 5 volt line in the set, there is a constant 5 volts running through it even when it is off....so long as its plugged in.
There may be condensors that are open on the 5 volt line.. after they warm up they start to function more proper. but being that they are leaky..they are no longer doing thier job of keeping voltage steady until they warm up.

i do not condone this but if you were to open it up , im willing to bet you have a series of swollen or blown condensors that are not doing thier job on the pwb (power supply board) if thats the case its a 30 minute fix for a technician. Id like to discuss this with you further , i do have a couple questions that may help me diagnose this.

Sony KLV-S23A10... | Answered on Dec 11, 2009


Hi I had the same problem with one of my TV's and I know this may sound daft, but mine was literally a signal problem, got a booster, re-tuned the DVB tuner, hey presto. You might not be so lucky, and may have an aerial issue, in which case, that's a job for the aerial chap, which incidentally I also had to have sorted.

Sony KLV-S32A10... | Answered on Dec 06, 2009


Good day sir/maam, the trouble is caused (possibly) by the failure of the IF amplifier system of your TV, it is usually sets of transistors, or an IC that controls the gain of your TV. Have your service repair man check the section fro the tuner stage to the IF stages. chances are the IC is not functioning properly. Hope this helps.

Sony KLV-S23A10... | Answered on Oct 12, 2009


Call for Waranty service,video backlight have prob.is dying.

Sony KLV-S26A10... | Answered on Oct 04, 2009


It's the B board.... (Logically speaking) !!!!!!!!!!!!

Sony KLV-S32A10... | Answered on Aug 28, 2009


If the Standby light is blinking at the front panel of the TV, it seems that there is an internal malfunction occurred in the TV.
I will forward a link to a page where you can get more information and troubleshooting steps for this issue.

http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C399467

Please perform the steps provided on the page. If the issue still persists then service of the TV is required.


Sony KLV-S32A10... | Answered on Jul 27, 2009


Please try the steps provided below and check if that helps.

Press the WEGA GATE on the Remote Control.
Then, select the SETTINGS option in the Menu.
Then, select the AUDIO Settings.
Then, set the STEADY SOUND option under the Audio Settings to AUTO.

Also try changing the MTS Setttings under the Audio Settings.

Sony KLV-S19A10... | Answered on Jun 18, 2009


Do you know where your remote is?I have had it where it would do that for days and then I would find my remote was wedged into my chair somewhere and when I sat down it would press a button.Either that or check the wires in the remote and TV.For the changing channels do you look at your remote when you press buttons to switch channels?There is a common button,which,when pressed,will surf through all of your tv's channels.

Sony KLV-S26A10... | Answered on May 07, 2009


How old is the TV?After a certain number of years the pixles will degrade and around key areas they will turn a rough color.Pink green orange blue,you name it.Otherwise It could be that it got damaged in a shipping process and then there wouldnt be much you could do except take it into the retailer where you purchased it and ask if the problem is fixable.

Sony KLV-S26A10... | Answered on May 07, 2009


hi friend,,,,,,,
i think due to high voltage resistor in dma board has blasted,,,,,
did u see any burnt marks,,,,,,,,,reply me

thank u,,,,,,,,

Sony KLV-S32A10... | Answered on May 03, 2009

Not finding what you are looking for?

-267 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76177 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Televison & Video

  • Forum

View Most Popular

  • Sony Televison & Video
Loading...