Sony XBR - Recent Questions, Troubleshooting & Support

Question edited for clarity. Question moved from Misc. It is a known issue. They should have been served a Class Action Lawsuit Claim! https://us.community.sony.com/s/question/0D50B00004IKxdISAT/sony-bravia-xbr55x850c-red-light-blinking-6-times?language=en_US https://techprofet.com/sony-tv-blinking-red-light-6-times/

In most of the case, the display panel is bad.

PLEASE ONLY REPLACE G6 BOARD AND G7 IS INVERTER FOR LD THANKS M NASIR

customer care support SERVICE number+1--833'''272''''0777,,,,,,,,,,,call them wow. mostly all new set from the last few years have a dual tuners NTSC and ATSC and that would depend if or which set will get the better signal. Also remember that off air is analog and the sets are now design for digital.

customer care support SERVICE number+1--833'''272''''0777,,,,,,,,,,,call them Most laptops have a combination of buttons you have to press on the keyboard to get it to output on the monitor output. Try pressing the FUNCTION KEY or FUNC/FN key usually found in the bottom left hand side of the keyboard. Keep that button held down while press one of the number keys.

customer care support SERVICE number+1--833'''272''''0777,,,,,,,,,,,call them Desafortunadamente la tarjeta madre tiene un fallo. Tendras que contactar la Sony para que te la reparen.

customer care support SERVICE number+1--833'''272''''0777,,,,,,,,,,,call them My new sony xbr 55hx929 on occasion shuts itself off and comes back on within a second or two. shuts off to the point when it comes back on the sony logo on screen is displayed and in the upper left hand corner the input (hdmi 1) is shown follow by the program on tv.

customer care support SERVICE number+1--833'''272''''0777,,,,,,,,,,,call them On the remote control on the top left corner a button marked i+ is there. Press it. This will eliminate the hdmi sign.

Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.For more details, visit the site Electro-help. Type in the site name, in the search box of your Google or Yahoo search engine, and click it to open.

customer care support SERVICE number+1- -833'''272''''0777,,,,,,,,,,,call them THIS SONY A-1300-319-A COMPLETE PC D BOARD IS DESIGNED TO WORK WITH SELECT SONYTELEVISIONS.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size. Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts

Need go to menu screen display and reduce bass to 1/4 level. Do not set more then 40%

Refer its user manual for details.

customer care support SERVICE number+1- -833'''272''''0777,,,,,,,,,,,call them I unplugged the unit from the AC outlet and after 1 minute tried again. It worked fine. Do you think that this was an isolated incident?

Your signal board could be damage. It will need to be replaced.You can get parts at www.interliquidparts.com

I had a similar problem with my 42 in Philips LCD HDTV.

Here was the problem. My Power Supply Board had several bad capacitors. I opened my TV (warranty was expired of course) and found four bulged capacitors on the PSB. Many major electronics companies Philips/Magnavox, Sony, Panasonic, and others were sold capacitors that failed in 2-5 years instead of 10-20. The capacitors fail prematurely due to a lack of preservatives. Unfortunately, they were installed in all sorts of devices and cause a wide range of failure problems.

Here are some options for you.

1. Have it fixed by a professional $$$$$$$??????? (Is it under warranty?)

2. Open your TV and find PSB. (The board that the power cord plugs into) Check for faulty caps. If you find some (bulged or leaking) bad caps replace the entire board. The entire board costs around $250 right now because they are in high demand right now. They can be found at tv-part.com but supplies are limited. I would definitely shop around though.

3. Remove and then replace individual faulty caps. This takes some soldering skill.

Caps are inexpensive and if you can take care of it yourself it will save you hundreds.

This may be your problem. If you determine that it might be.

I have a Tip/How TO tutorial on this site that may also help. It gives step by step instructions for replacing caps on PSB #715t2432-2. If this is your board you are in luck. It's called: Fixing the Philips Turns/shuts off on its own problem. I'm working on uploading pictures to help guide people though the process as well. Let me know if I can do anything to help.

Hope this helps and if it does please rate it accordingly. Good luck.

Kaufman605

Could just be a power issue. I have not done much with CRT televisions except smash them to bits. I would open it up and try and look for anything obvious. Since it is taking so long to come on, I am wandering if there is a cap that is failing. It will be hard to know if there is no visual evidence of failure, and the only true way to measure is with an ESR meter.

Your cable box most likely has a setting for audio HDMI such that HDMI sound is turned ON etc. rather than standard audio. Also check the TV settings for HDMI audio being set to ON. This should be a simple fix. HDMI audio usually is just a user setting adjustment and nothing more. Somewhere in your on-screen menus you should find the place to adjust HDMI audio.

Power supply. Disassemble and be careful tv is not plugged in. Check capacitors on power supply for bulges on top. Replace but make sure u deenergize before removal by touching the two poles together. I use a small nail file

Please understand that the TV does not have a lamp. The lamp is only available in rear projection TVs. The issue seems to be odd. I suggest that you unplug the TV for more than 5 minutes to perform a power resetting and check if that helps.