Whenever a PS2 game is run in backward compatibility mode, there's always a chance of a problem arising.
There were/are problems with this series of games running on the PS3. You'll have to wait until either Sony or the games publisher release an update to rectify the situation.
What were you doing when error occured? Seems like this error is common when trying to upload music to your ps3 via a CD. If so, some copied discs cannot be read by the PS3 or it could be protected in the data on the cd.
Guide Link: http://www.rsbot.org/vb/showthread.php?t=76184
Youtube Video proof Link: http://www.youtube.com/watch?v=uVWS5P5XqCY
!!!MUST READ FIRST!!! My official Guide and has a link of me playing runscape on the psp youtube video link in the guide showing proof that it works and that Iam the owner of the guide.
Also who ever copies and pastes(copyrights) the guide will get there thread deleted or I will find you using my friend "google" and delete your thread. I am prepared for any of these attempts from anyone so dont even try. Also dont try selling this on ebay or else I report you and I have proof so GL.
You should also register to the site, its FREE and while you register put RAMB0 as the refferer. Thanks and feel free to reply to my thread incase of any help.
Some one verify this answer so that everyone from google can read this and Thanks, happy to help.
If your ps2 controllers aren't vibrating anymore then this could be the fix that you were waiting for.
WARNING: Make sure that 1) Its not your controller that is broken, test it in a machine that does have vibration. 2) Make sure that the vibration option is turned ON in your games
If you are sure that your controllers aren't broken, then you may have blown a fuse inside your ps2 on your mainboard.
To fix it you have to remove a blown fuse from the ps2 mainboard and either put a new fuse there or replace it with a piece of single strand wire. The point is fairly small so you need a fine tip soldering iron and a single strand of wire. It may be best to get someone who is good at soldering to do this fix for you:
I take no responsibility for anyone breaking their ps2 when performing this fix. All I know is that i've done it and it worked a treat!
You will need;
1) A fine tip soldering iron and some thin solder. 2) A single strand piece of wire, something thin like kynar or enameled wire. 3) A game with vibration function to test the ps2 afterwards. 4) A controller that works with vibration.
Between the power supply connector and the PS9 fuse there is a small black square with 2 silver prongs on the left hand side. This featured on my mainboard as well, and I was able to locate the correct / broken fuse using a multimeter. Look for a fuse with S7 on the top near here, and check for continuity, If there is none then thats the one! One last thing before it goes into full detail;
Check the track between the black square with the silver prongs and the broken fuse, if its on the same track then you can attatch one end of the wire to that prong that is on the same track, and the other side to the end of the fuse opposite of the black square with silver prongs *
This will take bout 10 mins to do - start to finish.
Below tells you how to do it
Below is a description on where and what to look for i.e. the fuse, and how to repair it.
1. I have a V5 PS2
2. Take the PS2 apart.
3. Remove the Power Supply motherboard.
4. After removing the Power Supply Board, you will need to remove the metal shroud and expose the entire PS2 Motherboard.
5. Once you have done this look around the connector for the Power supply board on the PS2 mother board. You will see a number (maybe around 4 of them all located within 2 inches of the Power supply connector) of fuses with "S7" written on it.
6. The one you are looking for has the text "PS9" written on the motherboard next to it.
7. Check it with a multi-meter, for continuity, there will none. If you are not sure, you can check all of them, when the buzzing on multi-meter stops, that's the one.
8. To repair it, use a strand of wire, possibly from an old extension cable or something, but only one strand. Solder it on both sides of the fuse in order to close the connection.
9. Reassemble the PS2.
10. Boot up and play your game, vibration is back.
it's a copyright protection error... happens with some CD's... try copying the songs to a PC and use a flash drive to transfer, or copy to the PC and burn to a new disk
If a game freezes, then the problem is usually due to the PS3 overheating. The PS3 needs good airflow through the vents so make sure that you don't put it in a corner or in a place where the hot air won't linger around for long like near a window. Also, don't play for too long; give your PS3 a break every once in a while (1 minute breaks don't count) :)
If you can hear the music in your PlayStation 3 (PS3) but people speaking sounds faint and echoed, there are a few things you can try to improve the sound quality:
1. Adjust the audio settings: Go to the PS3 menu and select "Settings" > "Sound Settings" > "Audio Output Settings." Choose the appropriate audio output settings for your system and TV or monitor, and make sure that the correct input channel is selected.
2. Check your connections: Make sure that all of your cables are securely connected to the PS3 and the TV or monitor. If the cables are loose, this can cause poor sound quality.
3. Check the game or movie settings: If you are playing a game or watching a movie, check the audio settings within the game or movie to ensure that the sound is optimized for your TV or monitor.
4. Adjust your TV or monitor settings: If the sound quality is still poor, adjust your TV or monitor settings. You may need to adjust the bass, treble, and other audio settings to improve the sound quality.
5. Use headphones: If none of the above solutions work, consider using headphones to listen to the sound from your PS3. This can provide better sound quality and reduce background noise and echoes.
If you continue to experience problems with the sound quality on your PS3, you may need to contact Sony customer support for further assistance or repair.
Take care and have a great day! -Alex
I've seen this error code going around for the older PS3's. From what I can gather, it's a HDD issue that can't be cured easily. Here are the steps to take that I found, that seem to work for all PS3 systems.
take out the hard drive
connect hard drive to pc (running windows 7 64bit, but any windows os should work without other software)
open up disk management - in win7 it asked me to make a master boot record, so I did.
format in NTSF - that's right, NTSF - don't use quick format
shut down pc, take out hd, take usb drive too
put hd back in ps3, put usb stick in ps3
boot ps3
a screen will pop-up saying the hard disk have to be formatted
hold start + Select for 5 sec.
After formatting the system will restart and the update will start installing
configure your ps3 setup - done
Remember to get the latest firmware from SONY onto the USB drive.
im having the same problem to fix it i unhook my cable box (the video cables and the hdmi inputs to the tv) this stops the lines--try just the ps3 hooked to the tv and no other devices this should solve the problem--must be getting interference from some device
I think I just emailed you a Quote on Repair of this, if your name is Dennis. If you cannot get it repaired at the Quote A gave you. I suggest you open the case and clean up the entire unit. This may lead you into a majorly disabled PSP. I have great experience at doing this. The Milk can cause a form of electroplating to occur in your PSP. Where the Circuit traces run, power from the battery and the milk costing will actualy cause metal to migrate from on spot to another. You Joy stick and Pads at probably already joined or Shorted. My price is not bad. and less than the price of a Game. I gurantee the repair for 90 days. If your not Dennis, I suggest you click on " Repair Directory" and On the next Screen select " Video Game Consoles". Pick a good service. My service is listed near the top.
Yes, you can use European PS3 in Philippine, only if you don't play any region-locked DVD or Blu-ray. Also, if you want to watch some Pinoy movies on your PS3, here is a post including many sites for free download: https://www.leawo.org/entips/pinoy-movies-download-1409.html?fx=1409
My guess would be to take it to a local repair shop near you as they may not charge as much. The blinking lights that you are referring to usually mean the power supply has gone bad and power supplies don't run much. This guy thru Ebay has the power supplies for $50 and thats with free shipping. Don't know the guy personally but $50 seems reasonable if you know how to get into your ps3 and take out the old power supply and put the new one in. http://cgi.ebay.com/PLAYSTATION-3-PS3-POWER-SUPPLY-APS-226-OR-ZSSR5391A_W0QQitemZ300319803458QQcmdZViewItemQQptZVideo_Games?hash=item45ec748842&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1234|240%3A1308|301%3A1|293%3A1|294%3A50
Really its up to you. Its not hard taking the ps3 apart. Just taking a few screws out from the bottom and then a few from the top and taking the top cover off and exposing the ps3.
First, from your computer click the Download Link
to download the latest PS4 Update. Make sure you don't rename the downloaded file.
After download, plug your USB onto you Computer. Open the USB and make a folder inside named PS4 (you need to use Uppercase letters). Inside that folder create another folder named UPDATE. Then, just take the PS4UPDATE.PUP file you downloaded from the provided link and put it inside the UPDATE folder.
After that you just connect your USB with your PS4, and then from the Main Screen of your PS4 go to Settings -> System Software Update and just follow the instructions on-screen.
PS: Make sure you DO NOT turn off the console or remove the USB from the PS4 while the update is taking place, otherwise the system may be come temporarily or permanently damaged.
Download Link
http://dus01.ps4.update.playstation.net/update/ps4/image/2015_0625/sys_4f1c6d8597242ff346612773ffbc10ad/PS4UPDATE.PUP
1. First shut down the system by flipping the power switch in the back off.
2. Hold down the eject disc button.
3. While still holding down the eject button, flip the power switch to turn back on your PS3.
4. When the green light comes on, wait a few seconds then tap the eject button a couple times. The fan will run on full power and the disc will eject.
download limewire and go to were it says search put mp4 movies and download what ever you like but its going to take like to hours to download a movies when its finished downloading download it in the psp video folder that it i hope it works
Sounds like a hardware issue with the PS4 just like the first gen Xbox 360's Red Ring of Death my best suggestion is call SONY and see of it is still under warranty or if it is an issue they are aware of and will fix or replace your system for free like Microsoft did.
Download Link
http://dus01.ps4.update.playstation.net/update/ps4/image/2015_0625/sys_4f1c6d8597242ff346612773ffbc10ad/PS4UPDATE.PUP
