Splendide Washing Machines - Page 5 - Recent Questions, Troubleshooting & Support

I have a splendide 2000 / WD802 pre m with round power buttons. It came with a used RV I bought. Everything would work on it except the drum wouldn't spin at all. After some research and messing around with it I was able to fix it! You remove the back panel and in the bottom left corner there is a white control module chip board mounted in by two screws. Remove the two screws from the back for access to fix it. Now the top plug on pin 1 and 2 shoud have 2 white wires connected to pin 1 and one baby blue wire connected to pin 2. I jumped these 2 pins together with a small length of wire and now our machine spins and works great! Be sure to used at least 6 inches of wire at least as thick as the rest of the wires and make sure that it is well connected. I recommend you take the crimps off the blue and white wires and re crimp them with the jumper wire crimped as well. If you don't have a good connection with a long enough wire it will get hot and possibly catch fire so it is very important to do this correctly. I hope this helps someone!!

Re-word your question please. No internal lint filter. If you mean it turns but does not heat then the safety switch burned out and no longer allows the heat strips to operate. This problem is generally caused by a clogged or nearly clogged exhaust hose. Replacing the switch can be tricky on some models but some can be done by removing the front panel others by removing panel and belt and drum. That's when you call an expert.

Check the drain pump. There may be a coin, hairclip , button etc stuck in the blades of the pump. If the machine cant pump out, it wont go through the cycle.

I had a sock in the drain line..Also it could be the small pump is bad or a wire connector has come lose from it...Maybe a bad timer slso