Tektronix Office Equipment & Supplies - Page 2 - Recent Questions, Troubleshooting & Support

Please try the following links:Windows PostScript PPD Driver Files - 32/64-bitThis should open a screen showing the key information about the Driver Files and their End User License Agreement which you must agree to start the download.If the above links do not work, please copy and past the following into the address are of your web browser:http://www.support.xerox.com/support/docuprint-n4525/file-download/enus.html?operatingSystem=win7x64&fileLanguage=en&contentId=49291&from=downloads&viewArchived=false

Sounds like you've already diagnosed the problem.

Error 32 is most often caused by the cleaning blade clutch grease gumming up. Clean it completely with isopropyl alcohol and a lint free cloth and cotton buds. Re lubricate it with high temperature auto synthetic grease - make sure it has no mineral content.

Flat Rate - Complete On-Site Repair Service of your broken Tektronix / Xerox Phaser Printer

iTezen.com is Now offering Complete On-Site Repair Service of your broken Tektronix / Xerox Phaser Printer at a flat rate. Basically we repair any problem you may be having with your Phaser Printer for a flat rate. The flat rate covers cost of parts, labor and travel expenses. The flat rate is all you will pay to get your printer back in order. No hidden fees or charges. We show up! We Repair it. You pay us the rate for you model.

Our Flat Rates:
MODEL: Tektronix Phaser 840 Color Printer Repair - $159
MODEL: Tektronix Phaser 850 Color Printer Repair - $159
MODEL: Xerox Phaser 860 Color Printer Repair - $159
MODEL: Xerox Phaser 8200 Color Printer Repair - $159
MODEL: Xerox Phaser 8400 Color Printer Repair - $179
MODEL: Xerox Phaser 8500 Color Printer Repair - $199
MODEL: Xerox Phaser 7700 Color Printer Repair - $209
MODEL: Xerox Phaser 7750 Color Printer Repair - $249
MODEL: Tektronix Phaser 780 Color Printer Repair - $179
MODEL: Xerox Phaser 790 Color Printer Repair - $179

To further guaranty the quality of our services we accept COD payment (Cash On Delivery of service).Our technician will arrive at your location and repair your printer, get you printing again, then collect the payment.

We have technicians in:
Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South, Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, and Wyoming.

Itezen, Inc.
Tel. 516.776.7346
http://www.itezen.com/
Email: [email protected]

Recalibrate the colors. Flaking is sometimes caused by more ink/toner than can be fused to the media. There's a limit for the total amount of ink/toner. Yours may be set too high.
You'll need a copy of the Printer's User's Guide (also Downloadable from Xerox.com)

Controlling Color Density

When colors look faded, adjust the toner color density to extend the life of the components.

Print and use the Color Reference Page 1 In the printer's front panel, scroll to Calibrate Colors,

press Menu and print the Color Reference Page. 2 Compare the Color Reference Page to the Color Density

Samples on page 39. Make a note of the value (-10 to +10) for each color that most closely matches the samples.

3 Adjust the density for each color: Enter the value noted in Step 2 in the Calibrate Colors menu, under Adjust Each Color.

? Decrease color density: Press . ? Increase color density: Press --->.

4 Reprint the Color Reference Page; check your adjustments