The Health & Beauty - Page 6 - Popular Questions, Answers, Tips & Manuals
How do I put the trimmer blades and the top back on Remington PG200 Rechargeable Personal Groomer
Here are the steps for putting the trimmer blades and the top back on a Remington PG200 Rechargeable Personal Groomer:
- Make sure the device is turned off and unplugged.
- Locate the trimmer blade assembly, which is located on the top of the device.
- To attach the blades, align the notches on the blades with the notches on the trimmer assembly. Push the blades into place and make sure they are securely locked in.
- To attach the top, align the notches on the top with the notches on the trimmer assembly. Push the top into place and make sure it is securely locked in.
- Once the blades and top are securely attached, plug the device back in and turn it on.
- Test the blades by running the device on a low setting and make sure they are working properly.
It's important to always make sure the device is unplugged before attempting to install or remove blades. Be careful when handling the blades, as they are sharp and can cause injury if not handled properly.
If you have any trouble with the process, consult the user manual or check the manufacturer's website for more information or troubleshooting steps.
My jazzy wheelchair is stuck at one speed and the orange lights for speed are blinking orange, how do I fix this?
If your Jazzy wheelchair is stuck at one speed and the orange lights for speed are blinking orange, it is likely that there is a problem with the speed control module. This could be caused by a malfunction in the module itself, or by a problem with the wiring or connections.
Here are a few things you can try to fix the issue:
- Check the connections of the wiring to make sure that all connections are secure and not corroded.
- Check that the battery is charged, in case the issue is caused by low power.
- Try resetting the controller. Depending on the model of your Jazzy wheelchair, there may be a reset button or a specific sequence of buttons to press in order to reset the controller. Check the manual of your device or consult the manufacture website for specific instruction.
- Test the speed control module with a multimeter to check for continuity or test the wiring connections.
If the problem persist after trying the above solutions, it would likely need to be repaired by a qualified technician. It would be best to contact the manufacturer or an authorized repair center for a diagnosis and estimate for repair. They may also have information on warranty or options on getting a replacement if required.
Please note, opening the controller and tampering with the internal component can further damage the controller and will void any warranty it might have
My scales turn on but still do not work.
Hi,
Please first place an excercise weight on the scale . The scale might be attempting to calibrate it's sensors before being able to properly weight unknown items. After 30 seconds, it might ask you for some kind of input to specify the weight of the test item. Otherwise, you'll need to factory reset your scale.
Thank you.
Kymco foru charging problems
Hi,
You might try a different power socket to charge your scooter as the first one could be faulty. If this does not work, please use your scooter's manual troubleshooting section in order help overcome the issue. Thank you.
Not finding what you are looking for?