Toshiba Televison & Video - Page 2 - Recent Questions, Troubleshooting & Support
I have a Toshiba 32" xv555d tv. The power comes on when I switch it on, but only for a few seconds. The red light fades and tyhe poweer goes off.
You seem to be experiencing power issues with your Toshiba XV555D TV, where it powers on for a few minutes and then turns off. Such behavior can occur for a variety of reasons. Here are some troubleshooting steps you can try: Power sources and cables: Ensure that the power source is stable and that the power cord is properly located between the TV and the outlet. Sometimes an unstable power source can turn off the TV. Power Cycling: Unplug the TV, wait a minute or two, then plug it back in. Sometimes this can reset some internal features. Remote control and buttons: Make sure that any buttons on the remote control or the TV itself are not pressed or inadvertently, as this can turn the TV off unexpectedly External Devices: If you have an external device (such as a game console, DVD player, etc.) connected to the TV, try disconnecting it and see if the problem persists . . . . Sometimes a faulty outboard can cause electrical issues. Factory reset: If possible, do a factory reset on the TV. This will restore all settings to default values and may help fix software issues. Check for software updates: If your TV allows, check for firmware/software updates. Sometimes updates can fix bugs and improve TV performance. Ventilation: Make sure the TV vents are clear and unobstructed. If it gets too hot, it can turn off the TV as a safety precaution. Hardware Problem: If none of the above steps solve the problem, there may be a hardware problem. This can range from a faulty capacitor on the power supply board to other factors. In this case, you may need to consult with a technician to have the TV diagnosed and repaired.
8/4/2023 4:40:05 PM •
Toshiba...
•
Answered
on Aug 04, 2023
How do you reset a pin code for a phillips tv
If you have not set your PIN-code when you first turned on the TV
set, you need to do this before you can use the Child lock feature.
If you forget the PIN Code, unplug the AC power cord for 10 seconds
to restore the PIN Code to 0000.
If you need to set your PIN Code for the first time, proceed as
follows:
- Press the ' MENU ' button on the remote control to access the main
menu.
- Press the cursor up/down to select FEATURES and press OK.
- Press the cursor up/down to select Child Lock and press OK.
- When the Enter PIN appears on the screen, enter
'0000'.
Hooking up Toshiba dvd player SE-r0301 to technika tv
This will depend on how old the Tv and DVD player are. Most modern equipment now simply uses an HDMI cable. A simple plug it in at both ends, turn the Tv to the correct 'Input' screen and job done.
Older setups might use a Scart cable or even the older RGB/Component cables. Most Tv manufacturers now don't use these connectors as they are considered 'Old' and poor quality technology.
4/29/2023 1:08:24 PM •
Toshiba...
•
Answered
on Apr 29, 2023
Toshiba DVD recorder. What is E40 Error please?
Question edited for clarity and CapitalizatiON.
Here is the definition of E40 from the manual:
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
This means that the programs are conflicting with each other. The start time and stop time, will actually start using the electronics before the start time, and after the stop time. That length of time is unknown to me, but it is not a malfunction. You will have to practice with it to find out how much overlap exists, and set your timer accordingly.
and also
I have one more suggestion for you. I have done this to resolve the E40 error in the past. There is no guarantee that it will solve the problem on your device, but it's worth trying.
Before doing this, please note your scheduled recordings. This should not actually delete them, but I don't want to tell you that and then have them disappear.
From the Setup mode, select general settings and then Reset All. Reset Factory Default? Yes to confirm and then press enter.
..
4/16/2023 4:07:45 PM •
Toshiba...
•
Answered
on Apr 16, 2023
My Toshiba DLP Projection TV model number 44NHM84 will turn on but shuts off after 1-2 minutes. What do I need to do to fix this issue?
There are several reasons why your Toshiba DLP projection TV might be turning off after a few minutes. Here are some steps you can take to try and diagnose and fix the issue:
- Check the lamp: The most common reason for a DLP TV to shut off after a few minutes is a faulty lamp. Check the lamp to see if it's still functioning properly. If it appears to be damaged or has reached the end of its life (typically around 2000-3000 hours), replace it with a new one.
- Check for overheating: Overheating can also cause the TV to shut off. Check the fan to see if it's running properly and clean any dust or debris that may be blocking the airflow.
- Check for firmware updates: If the TV's firmware is outdated, it can cause it to shut off. Check the manufacturer's website for any available firmware updates and install them if necessary.
- Check the power supply: A faulty power supply can also cause the TV to shut off. Check the power supply unit to see if it's functioning properly and replace it if necessary.
- Check the color wheel: If the color wheel is damaged or not functioning properly, it can cause the TV to shut off. Check the color wheel for any damage or signs of wear and replace it if necessary.
If none of these steps solve the issue, it may be necessary to have a professional technician diagnose and repair the TV.
3/18/2023 8:32:27 AM •
Toshiba...
•
Answered
on Mar 18, 2023
Not finding what you are looking for?