Toshiba Televison & Video - Page 9 - Recent Questions, Troubleshooting & Support

Red means TV on standby. TV remote not working. Check the transmitter LED flashes by viewing remote on a digital camera or phone whilst pressing the buttons. The invisible light will flash purple viewed from the camera.

Toshiba... | Answered on Apr 09, 2019

How to access to my tv's service menu?

Toshiba Regza... | Answered on Apr 09, 2019

What's your source for the video? For video from a set-top box (Blu-ray. cable box, etc), you have to disable captioning at the source. The TV's CC control only work for OTA and unscrambled cable channels when the incoming signal goes to the RF (coaxial) ANT/Cable input. If this is your source, press the Menu button. Use the left/right arrow buttons navigate to the Preferences menu. Open this sub-menu (down arrow) and highlight the Base CC mode. Use the left/right arrows to change the current mode to Off. Press Enter and then press Exit to save and exit the menu.

The set-top box may not have an option to control the closed captions from the remote but accessed through the On-Screen Menu. On some satellite receivers that provide a signal to a primary and secondary TV. to enable or disable the captions on the second TV at the primary TV's set top box. Then both TVs will show the captions. On my IPTV box, I need to use a password from the service provider to access the Settings menu. The control for the Closed Captions are in the Hardware > Audio Settings menu.

I hope this helps. Please add a comment with the specifics about your devices/source. I can try to find the directions for disabling the captions for your source.

Cindy Wells

Toshiba... | Answered on Apr 09, 2019

Not sure what your asking

Toshiba... | Answered on Apr 05, 2019

We have no manuals. Google it and there are plenty.

Toshiba... | Answered on Apr 01, 2019

Check on Toshiba web site following their instructions.

Toshiba... | Answered on Apr 01, 2019

Use code search on your Chunghop URC to find it. It a search through all codes stored in the URC fails, try a different one.

Toshiba... | Answered on Apr 01, 2019

To enable this feature, use the included Voice Remote, press the Home button then go to > Settings > Display & Sounds > Power On and select Last Input.
The TV will turn on displaying the last used input (e.g. HDMI1)

Toshiba... | Answered on Mar 30, 2019

i found that using the assisted setup i was able to connect wifi. try doing this. i also have qwest so i have the password. also make sure you have the wlan plugged in to the tv lol

Toshiba 40UX600U... | Answered on Mar 26, 2019

These are the most common codes for Toshiba TVs

0156, 0060, 0154

Toshiba... | Answered on Mar 25, 2019

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Toshiba 57H81... | Answered on Mar 25, 2019

Not finding what you are looking for?
Toshiba Logo

Family Lines

22,812 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6063 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides