Tumi Watches - Page 3 - Recent Questions, Troubleshooting & Support
Silicon scientific atomic projection clock did no ...
I have one of these, and look for the manual on the 'Net every time DST changes, and eventually figure it out. Here's how: (1) Hold down the ALM/SET button until you get past the alarm setting and you see 24H or 12H. (2) Step through the settings by pushing the ALM/SET button, changing each as desired by pressing the +/CYCLE button. Eventually you'll wind up with the time zone indication flashing (it's really tiny, and appears just below the time indication). Press the +/CYCLE until you get to the desired time zone. (3) After the screen quits flashing, press the -/DST button to get the desired setting. I hope this helps, and that I can find this post again next time change!
11/9/2023 7:53:38 PM •
Watches
•
Answered
on Nov 09, 2023
How to change day in kadio kd 3806 wallclock
i do not know how to fix the time and the date and month in Kadio KD-3809 Digital Wall. Can you please help me? My son just lost the brosure and i am trying to fix it but I can not do it.
Thank you!
11/9/2023 5:17:29 PM •
Watches
•
Answered
on Nov 09, 2023
How do I set the time, does this watch take batteries?
You posted to Cameras category. I moved you to Watches.You asked the question"does this watch take batteries"?The watch that only you know what you have? You give no clue!They all take batteries unless it say 'Automatic' engraved on the back.
11/8/2023 6:04:45 AM •
Watches
•
Answered
on Nov 08, 2023
Need to adjust zero position
mcdevito75 here, Just a guess but here goes, start the chrono, now stop the chrono, the button you used to stop the chrono, press it again to retun to zero. Hope this helps.
11/6/2023 6:19:18 PM •
Watches
•
Answered
on Nov 06, 2023
HELP !! can't snap armitron watch cover back on
Take a small thin piece of cloth or paper towel, fold it and use to cover the watch face. Put one quarter (coin) on top and one quarter (coin) on the bottom. Place the sandwich in a pair of pliers, center thhe pliers and press, when you hear the snap, the back is on. Do not use on a watch with a domed crystal, or at least use a lot more padding over the face. Takes 10 seconds.
9/24/2023 9:37:19 PM •
Watches
•
Answered
on Sep 24, 2023
Where can I send my watch for repair
Unfortunately, you don't tell us the make of watch or where you live? Without that information it is all guesswork.
You local jeweler store will have a contact for basic watch repairs, and they will change batteries whilst you wait.
For high end quality watches, you send them to an authorized service centre. My Seiko goes back to the UK for service
Google
(make of watch) service centre
https://www.google.com/search?q=seiko+service+centre
..
7/29/2023 5:56:11 PM •
Watches
•
Answered
on Jul 29, 2023
KADIO KD-3806 Model watch.
ALL PARAMETERS CAN BE ADJUSTED BY USING KEYS
GIVEN BACKSIDE...KEYS ARE
MODE (LONG PRESS-4 SEC) TO ENTER INTO SETTINGS;
UP/DOWN TO CHANGE THE PARAMETERS; \
*C/*F KEY TO TOGGLE BETWEEN TO TEMPERATURE FORMAT;
SNOOZE BUTTON TO SET SNOOZE IN ALARM-MULTIPLE SNOOZE CAN BE SET;
RESET KEY CAN BE USED TO RESET CLOCK TO DEFAULT;
DAY COUNTDOWN , AND TIME COUNTDOWN CAN BE ADJUSTED;
DETAILED INFORMATION TO SET THE CLOCK
INSERT CELLS;-SCREEN SHOWS DEFAULT VALUES-INITIAL MUSIC WILL RING;
LONG PRESS MODE BUTTON-KEEP IT PRESSED UNTIL 12 STARTS BLINKING;
USE UP /DOWN BUTTON TO ADJUST HOURS...
THEN SIMPLY PRESS MODE AGAIN, NOW MINUTES 00 IS DEFAULT WILL START BLINKING;
USE UP/DOWN BUTTON TO ADJUST MINUTES;
AGAIN PRESS MODE, SCREEN WILL SHOW YEAR 2002 DEFAULT BLINKING, USE UP/DOWN KEY TO ADJUST YEAR;
AGAIN PRESS MODE, SCREEN WILL SHOW MONTH BLINKING, USE UP/DOWN KEY TO ADJUST CURRENT MONTH;
AGAIN PRESS MODE, SCREEN WILL SHOW DATE BLINKING, USE UP/DOWN KEY TO ADJUST YEAR;
AGAIN PRESS MODE, SCREEN WILL SHOW 12:00 BLINKING WITH ALARM SIGN (FOR ALARM SET);USE UP/DOWN KEYS TO SET ALARM, FIRST HOURS AND THEN MINUTES FOR ALARM; THEN ON PRESSING YOU CAN SELECT SNOOZE MINUTES;
AFTER SNOOZE ON PRESSING MODE AGAIN YOU CAN SELECT DAY COUNTDOWN TO SELECT 999 DAYS COUNTDOWN FROM CURRENT DATE;
when watch displays time and everything .....
each and every buttons has some function;(shortcuts)
press down to toggle between 12hr/24hr format;
press up to enter contdown timer;
press snooze to set snooze in alarm;
press c/f to toggle between two temperature formats;
press mode to toggle between alarm time and current time
7/2/2023 7:14:34 AM •
Watches
•
Answered
on Jul 02, 2023
Not finding what you are looking for?