Valor Toys - Answered Questions & Fixed Issues

give me your adress an I send you a [email protected]

I can't tell what kind of appliance you're talking about.... but, here's what I know.. This "lever" you're talking of kind of stumps me, but try, after the gas lights, to hold the lever in the position you had when you lit the flame. Hold it on for about a minute... then release it... and see if the flame will remain going. If you can't keep the flame going "no matter what", you probably need to clean or replace the flame sensor.

No, I have mine in manual mode, then hit the red (off) key and large flame key ( top right) at the same time. You should hear a click followed by a series of clicks as the pilot light turns on and then the gas valve opens and it should light. Having said that, I happen to have two that were installed at the same time. Unfortunately one has a bad remote control. I found that out after switching and syncing the remotes to the other insert. The good remote works on both and the bad one on neither. The bad remote would not let me set the time.

I have an AF16N. You just turn the knob and light with a match. Do you have a user manual? I'm desperate for one - willing to pay!!! Have had to disconnect the fire until I find a manual.PLEASE contact me on [email protected]

Have you tried changing the 9V battery under L side panel?
That's what was wrong with mine.

Cheers

the user guide can be download here:

http://www.partsarena.co.uk/baxi/System/DATA/Dx/DS1/user/4332/U14-4332/U14-4332.htm#zfuelbedrefittingceramicpebbles

You can view the fire opening requirements and product information on valor gas fires

Alternatively you can download a PDF of the complete manufacturers instructions here

You should be able to download the installer instructions on

Valors website, the information can be found here

under Trade then installer guides

www.valor.co.uk

alternatively new Valor Gas Fires

Sounds like it could be your thermo-couple.

or the microswitch you will find the number for valor here

Valor Gas Fires

I believe the valor is self generating. Ours is also not working and we need to replace it. Any ideas where to purchase one?

take the pink wire from the back of the radio and ground it... worked for me

Sounds like you are missing the central support rod or bar that connects the Babyweaver swinging crib to the stand, providing stability and support for the crib. This component is crucial for maintaining the structural integrity of the crib and ensuring safe usage. Here are some steps you can take to address the missing part: 1. Contact the Manufacturer: - Reach out to Babyweaver or the manufacturer of the swinging crib to inquire about obtaining a replacement central support rod. - Provide them with details about the missing part and the specific model of the swinging crib to ensure you receive the correct component. 2. Check for Spare Parts: - Check if the swinging crib came with a user manual or assembly instructions that may have information about spare parts or replacement components. - Look for any contact information provided for customer support or spare parts inquiries. 3. Online Search: - Conduct an online search using keywords such as "Babyweaver swinging crib central support rod" or "Babyweaver crib replacement parts" to see if you can find the specific part for purchase. - Explore baby product retailers, online marketplaces, and specialty stores that offer replacement parts for nursery furniture. 4. Local Retailers: - Visit local baby product stores or furniture stores that carry nursery items. - Bring the existing part (if you have one side of the support rod) to help them identify and match the missing component. 5. Custom Fabrication: - If you are unable to find a suitable replacement part, consider contacting a metal fabrication shop or a carpenter who may be able to custom-make a central support rod that fits your Babyweaver swinging crib. - Provide them with measurements and details about the required specifications for the part.

It sounds like the drop may have caused some internal damage to the electronics or wiring of the Teddy Ruxpin toy. Here are some steps you can take to try and troubleshoot the issue:

1. Restart the Toy: Sometimes a simple restart can resolve minor issues. Try turning off the toy completely, including any power switches or buttons, and then turning it back on again after a few moments.
2. Check Battery Compartment: Ensure that the batteries are properly inserted and making good contact with the terminals inside the battery compartment. If the drop caused any displacement of the batteries, it might affect the toy's functionality.
3. Inspect for Physical Damage: Carefully examine the exterior of the toy for any signs of physical damage, such as cracks, dents, or loose parts. If there's visible damage, it may indicate internal damage as well.
4. Test with Different Devices: If the Teddy Ruxpin toy connects to a separate app or device for sound playback, try connecting it to a different device to see if the issue persists. This can help determine if the problem lies with the toy or the connected device.
5. Contact Customer Support: If none of the above steps resolve the issue, it's possible that the drop caused internal damage to the toy's electronics or wiring. In this case, you may need to contact the manufacturer's customer support for assistance. They may be able to provide further troubleshooting steps or offer a repair or replacement option.

Keep in mind that since the toy is relatively new, it may still be under warranty, which could cover repairs or replacements for damage caused by accidents like drops. Be sure to check the warranty information or contact the manufacturer for guidance on warranty coverage.

I was able to find you this website with all kinds of great craft kits for pre-kindergarteners.

This game is a great one to play with kids on a wet afternoon stuck indoors. Basically use their toys to turn an area of the house into a toy store. Get the kids involved in choosing the games they would like to 'sell'. Write prices lists and stick them somewhere that the kids can see and reach ie Lego sets - $4, Dolls - $2

If you don't have any pretend money, you can make your own with the kids, then divide up the tasks and let them enjoy many hours of pretend shopping.

I would contact your service provider for the code.

Question edited for clarity and spelling of the maker, 'Spaulding'.

Manuals Page

Spalding.com https://www.spalding.com > customer-service > info > m... Systems Manual Finder. You will need your model number to locate the correct manual. Please follow the steps below or visit our interactive manual finder. ..

Check Batteries: Ensure that the batteries are properly inserted and have sufficient charge. Sometimes, a low battery can cause the toy to stop functioning. Switch On/Off: Confirm that the toy is switched on. Some toys have an on/off switch or button that might accidentally get turned off. Connections and Wires: Inspect the wires and connections inside the toy. Loose wires or faulty connections can lead to malfunction. Obstructions: Look for any obstructions or debris that might be preventing the T-Rex's movement. Clear any blockages. Reset: If there's a reset button, try pressing it. This can sometimes resolve minor issues. Contact Customer Support: If none of the above steps work, consider reaching out to Fisher-Price customer support as below. https://service.mattel.com/us/ContactUs.aspx

You use a USB charger lead to charge the battery in the helicopter. The controller takes 6 x AA batteries. https://rc-today.ru/UserFiles/Image/Instructions/-S929.pdf https://www.google.com/search?q=rfd001+helicopter+charging+lead ..

It is too old (1970s) for that data to be on the Internet. There is one for sale on eBay, buy it and carefully look inside. https://www.google.com/search?q=Need+Play+%27N+Learn+Computer+420 ..