Velocity Tablets & eReaders - Popular Questions, Answers, Tips & Manuals
I CANT REMEMBER MY PATTERN LOCK ON MY MICRO CRUZ VELOCITY READER I HAVE PUT IN WRONG PATTERN 40 TIMES N ITS STILL NOTHING.. HELP ME SOMEBODY PLEASE N THANK U
Hi, you will have to factory reset! Follow these instructions:
A.) With the device powered off, press and hold the volume up button (keep holding), then press and hold the power button at the same time. Keep holding both buttons. The Cruz logo will appear, you may then release the buttons. Then the Android robot and software package icons will appear on the screen.
B.) The moment you see the Android robot, you will need to access the System Recovery menu by pressing and holding the Power button, then tap the volume up button once, releasing both. This is in the opposite order of the sequence in Step A.
NOTE: The volume up button on the T408 is toward the power button, while the volume up button on the T410 is away from the power button.
C.) In the System Recovery menu, use the volume toggle to navigate up and down through the menu and hightlight your selection. Use the power button to activate your selection. Select the option that corresponds to clearing cache and data. Once completed, select the option to reboot your device.
Tesoar tablet freezing on tesoar screen
Try this:
First, turn your tablet off. Then, power the tablet back up by holding down the volume (either + or - ) and power buttons simultaneously. Continue holding the volume button until the screen says "Booting tablet in recovery mode." This will give you a picture of an Android. Tap the android, and you will be given a screen with several options. Move between the options with the + and -, and select with the power button. Go to the option for Factory Data Reset and select it. Scroll down to `the Yes, and then the tablet will erase its memory back to factory settings. Once it has completed, select Reboot Tablet Normally.
Locked myselfout. Dont remember password can I reset?
You can try pressing the factory reset button (with a paperclip, most likely) when powering up. This should clear out all settings and software and give you a new beginning. If not, contact Manufacturers tech support. Good Luck
I have a 7" Tesoar tablet and it worked great for a while and now the only thing it will do is turn off and on. When it's on it stays stuck on the white Tesoar screen.. Can I reset somehow? It will no
If a factory reset to default won't work, which it looks like it won't, I think one course of action is to open the back, disconnect the LI-ON battery, (it probably has a small, delicate three pin micro plug, so care is the operative word!), wait about 10 seconds or so, then reconnect it, and see if it then powers up properly.
That is what I did with my T310 when it went into a state of limbo.
Word of caution, opening the back will more than likely invalidate any warranty you have.
My cruz wont turn on after i reset it?
Most tablets are still in the factory settings so if u have a professional to look at it he might be able to turn it on and u could then have him look at the charge thing.
No wi fi
have you tried the hard reset button ? or the bluetooth / wifi board has failed.
How does and android charger look like
A USB cable with a micro-USB connection at the phone or tablet...
You can plug the USB directly into your PC, get a car adapter with one or two USB ports, or a small outlet adapter with one or two usb ports.
UNLOCK CRUZ SCREEN
Do a hard reset, you will lose your data, but the lock screen will be gone
Wifi connecting
When creating a connection to internet, you need a point (read : router) which facilitates this. If you don't have a router in your neighbourhood, you can't connect to the internet. Even if there is one near you, you must be able to see it, by checking at your tablet for wireless connections. However, some routers are set to accept only connections, when a user ( your tablet) can provide this password everytime it tries to connect to the internet.Schematic of internetconnection :Tablet --- WiFi Router --- Modem --- Internet(provider).
I forgot my pattern code
You will need to do a factory reset:
- Power device off.
- Press and hold down Up Volume and Power Key for 10 seconds and release after seeing the Cruz logo.
- You will then be brought to the Recovery System screen with a Android robot and an alert triangle on the background
- Press the Up Volume Key and the Power Key at the same time once (don't hold them down) then the recovery selections will show up.
- With the Volume keys scroll and select Wipe data/Factory Reset and make your selection with the Power key
- With the Volume Keys scroll and select Yes to confirm the action and make your selection with the Power Key
- Select Reboot system now.
Forgotten pattern to unlock
try 4-5 times continuously after that it would ask you the security answer, filled at the time of applying pattern lock.
Not finding what you are looking for?