ViewSonic Televison & Video - Page 7 - Recent Questions, Troubleshooting & Support
How to remove base stand for VPW425
These kind of things are usually covered in detail, with pictures, in the user manual.
The stand will be bolted to the TV. You need to find where those screws are and remove them.
How do I get the volume to work on my sky remote control?
I've just done this, guided by SKY but all you really need to do it....
Press Interactive button on remote
Choose option 5
Then choose set remote control, it should give you instructions and the correct cde fo ryou specifc tv
Good luck
x
TV wont turn on but has orange light
Most likely it's a capacitor fault.
Google "Capacitor bulge" and then search Youtube for your make and model to see if anyone has done an instructional video. You'll need to be comfortable dismantling the TV and be able to use a soldering iron. If this isn't you then take it to a repair shop.
9/7/2014 6:04:52 PM •
ViewSonic...
•
Answered
on Sep 07, 2014
No sound on Viewsonic Tv
Check the speaker/s first. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
9/3/2014 3:23:33 AM •
ViewSonic...
•
Answered
on Sep 03, 2014
Fix tv no sound
Check the speaker/s first. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
How do i fix the sound?
Check the system settings first. Go to the picture settings, and check whether the reviving system is set right. That is; do it match the color system adopted at your country; whether it be PAL, SECAM, NTSC .58, NTSC 4.43 etc, whatever it may be. If your TV set is a multisystem one, set this system settings to "Auto"
If all are OK, and still there is no audio from the set, Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
Not finding what you are looking for?