Vision Fitness Exercise & Fitness - Recent Questions, Troubleshooting & Support


Contact Vision Fitness directly to inquire.

Vision Fitness... | Answered on Aug 13, 2019


Dear Sir:

Please see the diagram attached from REED switch, adjust, clean, and tight the connector wires very well.

2) change the batteries by new ones, use the best.clean the contact batteries.

3) tight the ribbon cable from keypad .+ tight the connector from display board vs lower board.

4) after you fix it RUN THE sofware calibration for diagnose, troubleshooting, See my personal tips for help

sincerely. God bless you
5_3_2012_12_57_12_am.gif

Vision Fitness... | Answered on Mar 29, 2019


If you wish to get some details; check the site linked here. Pull up older posts treadmill . Surf the site with patience.
http://electro-medical.blogspot.com/

Vision Fitness... | Answered on Mar 04, 2019


1)probably a faulty speed sensor 2) the speed sensor is not plugged in properly.3) possibly a faulty motor test for 115 vca without load 4) control board or lower board for measure 115 vca and +5vca 5) Run the calibration sofware for easy diagnotic see the diagram attached.6) Test the transformer for primARY VOLtage and secondary voltage. see the TIP. The error codes will differ between makes and models but could be e1.

http://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitness

http://www.fixya.com/support/r10786838-test_procedure_dc_motor12_26_2011_5_05_23_pm.jpg12_26_2011_5_06_14_pm.gifSincerely. Happy New Year . G-d bless you
ernesto cuadra
managua,nicaragua c.a.

Vision Fitness... | Answered on Mar 04, 2019


If you wish to get some details; check the site linked here. Pull up older posts treadmill . http://electro-medical.blogspot.com/ Surf the site with patience.

Vision Fitness... | Answered on Mar 04, 2019


First thing to do with these folding vision fitness treadmills is
REPLACE THE MAINS SUPPLY CABLE
They were supplied with very poor quality cable that cause issues like juddering stopping and speed fluctuations.

Vision Fitness... | Answered on Mar 04, 2019


There is a special lubricant spray for treadmills that you spray. injection pump. The air injection pump is designed with a check valve inside which only allows air to flow in one direction, preventing exhaust gases from escaping through the air pump and only allowing air to enter. When this check valve fails, moisture is able to get inside the air pump. Make sure you don't have dirt and dust build-up before spraying.

Vision Fitness... | Answered on Mar 22, 2018

Not finding what you are looking for?
Vision Fitness Logo

123 questions posted

Ask a Question

Usually answered in minutes!

Top Vision Fitness Exercise & Fitness Experts

Ngoro

Level 3 Expert

2158 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

30441 Answers

ray gallant

Level 3 Expert

66208 Answers

Are you a Vision Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...