Whistler Vehicle Parts & Accessories - Page 8 - Recent Questions, Troubleshooting & Support
Got a whistler xrt-695 from individual. unit
how long have you had it? Have you had a radar detector before this one? Try a factory reset - hold in the power button and the quiet button, while holding in these buttons plug in the power cord. The unit will beep twice indicating that its reset. Remember the unit is not a "Cop" detector its a radar detector so not all police cars have radar in them and if they do they may not have it turned on.
Need a new speaker for
You can order a new speaker by calling 800-531-0004. The cost is $10 which includes shipping.
Need anew speaker
You can call 800-531-0004 to order a speaker for your detector. The cost is $10 which includes shipping.
My whistler quit working. How
What Quit? Does it not power up? If so, have you checked the fuse that is in the plug end of the power cord? The tip unscrews to reveal a 2 amp glass fuse. Does the lighter socket power other 12 volt devices? If not, check the vehicle's fuse box. Did you press or turn the power switch? (sorry had to ask)
Manuel fuzz buster FB 3500
First this is not a Whistler Product. Second what is the problem with the unit? Is it a F3500 or F4000?
WHEN I PUT THE BATTERYS
Try the factory reset to see if this clears up the problem. Take out the batteries, hold in both the Power and Quiet buttons, while holding in these buttons plug in the power cord. THe unit should beep twice indicating that the unit has been reset.
Led display shut down when the detector detect an
You have the unit in dark mode. Press the Dim/Dark button again to get the unit to full brightness. THe unit has 3 levels of DIM. First the unit is at its full brightness, pressing the dim/dark button will dim the display and the unit functions normally. Press the Dim/Dark button again will futher darken the display but when the unit alarms the display is turned off and remain off during the alert. After the alert is over the unit waits 20 seconds of no alert to turn the display back on.
Why does vg-2 and spec
It will only alarm VG_2 when you have turned on this feature otherwise it will not. Not sure what you mean by "spec" however. From the manual "
DARK/VG-2 Button - Reduces illumination of display
to "dim" or "dark" settings. Press and hold (for two seconds)
to engage or disengage VG-2."
I cant get the outside
Go into option mode, scroll through the options until you see TEMP N, press the dark buton to change it to TEMP Y and the unit will display the temperature.
Not sensing any radar and not charging the
Make sure that you have the unit set to Combo mode (assuming that your model has a compass feature as you didn't tell us what model you have). You can also perform a factory reset on the unit, With the batteries removed, Press both the power and quiet buttons in, while holding in these butons plug in the power cord. THe unit should beep twice indicating its been reset.
Give this a try. If your still having problems, email
[email protected] for more info.
2/28/2011 9:38:40 PM •
All Band...
•
Answered
on Feb 28, 2011
Where to mount a 680
Anywhere on the dash or on the windshield as long as the unit is level with the road. Now, you know that this model does not pick up the full Ka band (only 34.3) and it doesn't detect laser.
I have a Whistler 35
All Whistler's that are not battery powered run on 12 volts with the center tip postive. You can order a power cord by calling 800-531-0004 or whistler's online store at
www.whistlergroup.com.
I need a user manual
The manuals are not available onlline but you can look at the specs at this page -http://www.whistlergroup.com/de1430.asp If you need any more information email
[email protected] and they can help you.
I have the whistler xtr440
Powering the unit on will autotmatically turn on all the bands. Remember, not all police vehicles have radar and ones that do may not have it on.
Not finding what you are looking for?