Xerox Phaser - Popular Questions, Answers, Tips & Manuals
Grey haze on all the printouts
You should always use Original Equipment replacement drums, fusers and other devices made to the specification of the manufactures product. This will eliminated problems such as lines, blurring, hazes, and modeling. I some cases using other than OEM products can void a MFG Warranty.
I would suggest doing a very thorough cleaning of the interior of the printer. Remove and replace the hardware (Drum/rollers) and start fresh. Once that has been done, the printer will do a reset and start up like new. If it was cleaned properly, all current prints should be perfect. Other than that, any haze or poor reproductions thereafter would be related to a malfunction of the printer itself.
I have a Phaser 8500.
are you using the correct driver? If you are printing from an Apple Mac you need to load the postscript driver other wise install the pcl6 driver
Xerox Phaser 7400DN keeps rejecting jobs I send
It's hard to set up the mpt tray when the display is out. Send the job to the printer with no paper in the mpt. The printer should then ask you to put 11 x 17 in the mpt. Hope that helps.
Not finding what you are looking for?