Xerox Office Equipment & Supplies - Page 5 - Popular Questions, Answers, Tips & Manuals
I need help on Xerox 8080
error 099-336
That is a problem with the fuser and it could be the fuser or it could be the power supply. Xerox is proprietary and you will have to contact them with you wallet in hand to get this repaired.
Print erasing problem in xerox5335
I had a Xerox 5035 copier and had a device called a Wiper that removes the remains of the old image on the drum to the toner sump. Seems that these wear and cause what you talk about. Good Luck there are service manuals, very hard to locate. I dropped the links after I gave mine away.
Xerox wc 7435 error code 010-337
"- To clear this fault, first remove the cause, next clear the value of NVM [744-248] to "0", and then turn the power OFF then ON.
The flag of NVM [744-248] indicates 0: Normal, 1: NCS-Center abnormal high temperature value, 2: STS-Rear abnormal high temperature value,
and 3: NCS and STS high temperature error.
- When turning the power OFF, turn OFF the power switch first and then the main power switch."
Xerox 700 045-310/360 error
Hi.
- Code: 045-310
- Description:Image Ready Error Unable to send the Image-valid signal cannot within the specified time. NOTE: When the attempt to expand the image has failed, [016-776 Marker Code Detection Fail] occurs after the recover operation.
- Remedy:1. Check the USB Cable (Local) for poor connection. 2. If no problem is found, replace the ESS/MCU PWB. (PL 18.1).
Good luck.
Not finding what you are looking for?